Made in the USA.

The Magpul GL Enhanced Magazine Well for GLOCK 19 GEN 4 is a high performance, purpose-built Glock frame magazine well. It was designed to enhance and ensure positive magazine insertion in high stress scenarios. Its sleek and ergonomic design features also provide excellent concealment and ensureg minimal printing to the user's clothing. Ramp and edge geometry allow for the smooth removal of faulty or stuck magazines during reloading or immediate action events.

The Magpul GL Enhanced Magazine Well is optimized for use with standard capacity Glock factory magazines, Magpul GL magazines, and a variety of aftermarket floorplates and extensions that are available for both. Recent generations of reduced capacity (10 rd) factory Glock magazines have several dimensional differences which may interfere with any magazine well, including the Magpul GL Enhanced Magazine Well. Some large aftermarket floorplates may also interfere.

The Magpul GL Enhanced Magazine Well for Glock 17 Gen 4 and Glock 19 Gen 4 are not compatible as delivered out of the box with optional factory Glock Modular Back Straps. While end user modification is minor and may be attempted, it is taken at the user's risk.

Due to inherent variances in Glock frame production, if an excessively tight fit is experienced during the installation of an Enhanced Magazine Well that requires excessive force it is recommended that a professional gunsmith be utilized to complete the installation to mitigate the potential for frame damage.

Made in the USA.

The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Our lightweight Mil-Spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. Its low-profile design conceals its internal mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between user configurations.

In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Its aluminum and stainless steel components, along with its injection-molded reinforced polymer, ensure years of dependable performance and reliability, all while shaving weight. It's extremely light weight, at just over 11 oz.

Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”. An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs. It also has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. Anodized surfaces and tight, precision tolerances mitigate squeaks and rattles.

A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style.

The Magpul Bipod is available in BLK or FDE colors.

Made in the U.S.A.

The Magpul® MS1 QDM Sling further enhances one of the most versatile line of rifle slings by including factory-installed Magpul QDM quick-disconnect swivels. As a heavy-duty replacement for the typical pushbutton swivel, the Magpul QDM offers an innovative low-profile design, singlehanded manipulation, a superior corrosion-resistant Melonite® finish, and a high-strength, freely rotating bale that canalizes sling webbing to prevent rollover. This sling system not only provides the strength, speed and security of Magpul QDM hardware, but is also optimized for dedicated two-point sling functionality built around the streamlined MS1 Slider.

Once set, this system allows for rapid adjustments to either lengthen or shorten the sling without slippage, tails, loops or other potential snag hazards. In a two-point role, the MS1 allows seamless shoulder transitions, fast adjustability for hands-free rifle carry and shooting support from various positions. The Magpul MS1 QDM Sling retains all of the original MS1 functionality and is fully adaptable for one-point applications with a series of adapters (sold separately) based on the MS3® and MS4® Slings. 

In testing, the MS1 Sling survived tens of thousands of cycles in wet, dry and sandy conditions, static-load testing without slippage for 72 hours, and weighted six-foot dynamic drop tests. In addition to the controlled lab tests, we also swam with it, jumped with it, hunted with it, hiked into the mountains with it, and—most importantly—shot with it in a variety of rugged field conditions. 

The Magpul MS1 QDM Sling is made in the USA and is fully Berry Amendment compliant.

The Magpul Bipod for M-LOK offers serious strength and versatility at a price that provides unmatched value. Our lightweight Mil-Spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. Its low-profile design conceals its internal mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between user configurations.

In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Its aluminum and stainless steel components, along with its injection-molded reinforced polymer, ensure years of dependable performance and reliability, all while shaving weight. It's extremely light weight, at just over 11 oz.

Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”. An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs. It also has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. Anodized surfaces and tight, precision tolerances mitigate squeaks and rattles.

A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style.

The Magpul Bipod is available in BLK or FDE colors.

Made in the U.S.A.