Port Cover Assembly Complete

Feel free to ask all the question you have. We take the time to answer them all!

Complete, 6.8 SPC AR-15 bolt and carrier assembly comes with all the parts, fully assembled, and ready to go. Drop it in your Milspec AR  and you’re ready to shoot. Precision-machined carrier and bolt manufactured for us to our specifications.  All components, including bolt and gas key, have a uniform matte black Parkerized finish. All metals, Hardness, and Coating meet or exceed Mil-spec. Carrier coated with Phalanx (Black Nitride) Coating for extreme wear and corrosion resistance. Bolts are made by CM from Carpenter 158 Steel. Carrier are faceted to add a bit of weight and give that extra custom look to the rifle. Each is test fired to insure you will not have problems.

Feel free to ask all the question you have. We take the time to answer them all!

Bring the power of AutoLive to your favorite optics! The AutoLive Battery Cap is compatible with many of the industry’s most popular optics and brands, allowing you to improve their performance with motion-sensing illumination control. If your current optic has short battery life, or if you want ‘always-on’ storage for home defense, the AutoLive Battery Cap is the perfect upgrade for you.

• Integrated AutoLive motion sensing technology
• Instantly turns on optic illumination when you pick up your firearm
• Low profile design
• Extends battery life

Compatibility:

• Primary Arms SLx 1-8×24 FFP & SFP
• Primary Arms SLx 1-10×28 SFP
• Primary Arms SLx 1-6×24 SFP Gen III and IV
• Primary Arms SLx 1-6×24 FFP
• Sig Optics Tango6® MSR 1-6x24mm
• Vortex Strike Eagle® 1-6 SFP
• Vortex Strike Eagle® 1-8 SFP

Product Details

The MS1 Padded Sling is an optimized, dedicated two-point sling that serves equally well in a one-point role when using optional adapters. Built around our MS1 slider, this system provides rapid adjustments to either lengthen or shorten the sling with no slipping once set, and no tails, loops, or other potential snag hazards. In a two-point role, the MS1 allows easy shoulder transitions, rapid adjustability for hands free rifle carry and shooting support from various positions. The MS1 system also has a series of adapters that are sold separately and based on the MS3® and MS4™ slings. By adding the appropriate adapter (available with Paraclip™ or QD Sling Swivel) for the sling, you can easily add one-point functionality to your MS1.

Product Details

Driven by the operational experience of Magpul Core™ instructors, the MS3 Multi-Mission Sling System was designed to give a versatile weapon-retention solution for a multitude of tactical environments and missions. As a standalone product, the rapidly-convertible MS3 allows an operator to leverage the maneuverability of one-point attachment for direct action, or two-point attachment for stability. Single-hand adjustments and quick-release, positive-locking hardware provide flexibility and durability in a truly adaptable sling system. Used in conjunction with the Magpul ASAP® plate (sold separately), the MS3 enables seamless transitions into an array of shooting positions without getting bound or fouled. The MS3 concept allows switching from Weapon Shoulder to Reaction Shoulder for shooting around corners, under vehicles, or to minimize exposure. The MS3 can also increase operator survivability by keeping the weapon in the fight in case of injury to the operator's shoulder, arm, or hand. The MS3 GEN 2 incorporates a new low profile quick-adjust Slider which minimizes bulk and allows for secure, yet effortless, sling adjustment. Webbing length has also been increased for a comfortable fit with all body types and armor configurations.

Made in U.S.A. and 100% Berry Amendment compliant.

Product Details

The MS1 Sling is the most versatile addition to the Magpul® line of rifle slings. This sling system starts as an optimized, dedicated two-point sling that serves equally well in a one-point role when using optional adapters. Built around our MS1 slider, this system provides rapid adjustments to either lengthen or shorten the sling with no slipping once set, and no tails, loops, or other potential snag hazards. In a two-point role, the MS1 allows easy shoulder transitions, rapid adjustability for hands free rifle carry and shooting support from various positions. The MS1 system also has a series of adapters that are sold separately and based on the MS3® and MS4™ slings. By adding the appropriate adapter (available with Paraclip™ or QD Sling Swivel) for the sling, you can easily add one-point functionality to your MS1.

In testing, the sling had to survive tens of thousands of cycles in wet, dry and sandy conditions, static load testing without slippage for 72 hours and weighted six foot dynamic drop tests. In addition to the controlled lab tests, we also swam it, jumped it, hunted with it, hiked into the mountains with it, and most importantly shot with it in a variety of rugged field conditions.

The MS1 Sling is made entirely in the USA, and is fully Berry Amendment compliant.

Product Details

Made from reinforced polymer and an anodized aluminum bedding block, the Magpul Remington 700 Hunter Stock offers users a cost effective replacement featuring fully adjustable length of pull, comb height, and enhanced ergonomics. 

Compatible with Remington 700 Short Actions, this stock requires no bedding and is a true “drop-in” solution for the end user*. This stock is also M-LOK compatible to accept a broad range of accessories.

Also available is our Bolt Action Magazine Well, which allows the rifle to be used with detachable box magazines without the need for custom inletting.

Made in U.S.A.

FEATURES

• Compatible with standard Remington 700 pattern short actions with stock Remington hinged floorplates*
• Easily upgradeable to removable AICS-spec magazines (5.56x45 or 7.62x51 pattern) with the affordable Magpul Bolt Action Magazine Well
• Reinforced polymer shell with Type III hard anodized, machine finished, A380 cast aluminum V-bedding block
• Tapered Beam design provides good rigidity through forend
• Free-floats ALL factory Remington barrels including aftermarket profiles up to a Medium Palma (0.920" dia. 5.50" forward of the breech)
• 60 degree grip angle from bore axis
• Adjustable LOP from 13.0”-15.0” with included 0.50” Spacers
• Rubber recoil butt-pad included and optional OEM Butt-Pad Adapter available for use with aftermarket pads
• Optional High Cheek Riser Kit with 0.50" and 0.75" Risers to adjust cheek weld (Stock comes pre-fitted with 0.25" Riser)
• Accepts factory and most aftermarket triggers
• M-LOK™ slots on forend sides and bottom for a wide variety of accessory and sling mounting options
• Three dimpled drill points to install optional standard swivel studs (#10-32 x 3/8” long dome stud)
• Push-button QD swivel compatibility in rear with optional Sling Mount Kits
• Left and Right rear 1-1/4” Footman’s Loops