Super Dynamic - Combat Trigger
The Geissele Super Dynamic - Combat (SD-C) Trigger is
a semi-auto only version of the select-fire trigger that
Geissele makes for customers in the U.S. Special
Operations community. The SD-C is a rugged, non-adjustable
combat trigger with a sear design that provides a wide
margin of safety against unintentional discharges yet still
gives the operator a sharp, repeatable trigger release. The
SD-C’s positive functioning and extreme reliability is ideally
suited for weapons used in harsh, demanding environments
such as Close Quarters Battle (CQB) and Squad
Designated Marksman (SDM) applications.

Feel free to ask all the question you have. We take the time to answer them all!

Super Dynamic - 3 Gun Trigger
The Geissele Super Dynamic - 3 Gun (SD-3G) trigger is a semi-automatic-only derivative of the two-stage Super Select-Fire (SSF) combat trigger that Geissele Automatics produces for customers in the U.S. Special Operations Community. The SD-3G was developed to combine the SSF combat trigger’s match-grade semi-automatic performance with its smooth single-stage full-automatic feel to make a fast, smooth, and robust trigger ideal for 3 Gun competition shooting. The new Geissele Super Dynamic - 3 Gun trigger has a super short trigger pull and a short reset so that rounds can be sent downrange as quickly as possible while still maintaining superb accuracy.
 

1. The shooter starts pulling the trigger as his sights become aligned on target.
2. At about 3.5 lbs., the trigger starts to move back smoothly, like it’s on ball bearings.
3. After the trigger moves a short distance, the weapon discharges. Nothing precedes the discharge: no second
stage stop, no grittiness, no stacking of the trigger pull weight as the hammer is cammed down like on a stock
AR15 trigger. The trigger finger feels a sensation of walking along a perfectly flat, glassy-smooth plateau that suddenly drops away.
4. After a short overtravel, the trigger is quickly reset when the shooter slightly relaxes his trigger finger and the next shot is ready to be fired without having to go back to the beginning of the trigger pull cycle.

Feel free to ask all the question you have. We take the time to answer them all!

The Geissele Super 3 Gun (S3G) trigger is a semi-automatic-only derivative of the two-stage Super Select-Fire (SSF) combat trigger that Geissele Automatics produces for customers in the U.S. Special Operations Community. The S3G was developed to combine the SSF combat trigger’s match-grade semi-automatic performance with its smooth single-stage full-automatic feel to make a fast, smooth, and robust trigger ideal for 3 Gun competition shooting.

1. The shooter starts pulling the trigger as his sights become aligned on target.
2. At about 3.5 lbs., the trigger starts to move back smoothly, like it’s on ball bearings.
3. After the trigger moves a short distance, the weapon discharges. Nothing precedes the discharge: no second
stage stop, no grittiness, no stacking of the trigger pull weight as the hammer is cammed down like on a stock
AR15 trigger. The trigger finger feels a sensation of walking along a perfectly flat, glassy-smooth plateau that suddenly drops away.
4. After a short overtravel, the trigger is quickly reset when the shooter slightly relaxes his trigger finger and the next shot is ready to be fired without having to go back to the beginning of the trigger pull cycle.

Feel free to ask all the question you have. We take the time to answer them all!

Geissele Upgrade Trigger for FN SCAR 16 & 17.

The Geissele Super Semi-Automatic Enhanced (SSA-E) Trigger is a finely-tuned semi-automatic-only version of our full-auto,
two stage combat trigger presently used in the U.S. Special Operations Community. Built on the chassis of the Geissele SSA,
the SSA-E provides enhanced trigger control and weapon accuracy while maintaining the robustness and reliability of our
combat-proven two-stage trigger. The SSA-E’s reduced 1st and 2nd stage pull weights result in a trigger with a smooth, light
1st stage take-up and a crisp, candy cane-like 2nd stage break. The SSA-E is ideal for use in precision Squad Designated
Marksman type rifles where weapon accuracy and reliability are critical and a non-adjustable drop in trigger is desired.

1. Performance Advantages for the Shooter
• The Geissele SSA-E has a pull weight of about 3.5 lbs. There is 2.3 lbs. on the 1st stage and 1.2 lbs. on the 2nd stage. The pull
weights and sear engagement are non adjustable by the shooter.
• Trigger and hammer are made from quality tool steel.
• Sear surfaces are cut by a wire edm machine. Sears cut this way are very accurate and the non-directional surface finish of the wire
edm gives a smooth trigger pull without the associated grittiness of directional machining marks left by a milling cutter.
• The initial force needed to start the disengagement of the sear surfaces is low and the force linearly increases at a low rate. This
helps the shot to fall at the initial point of aim and aids in building shooter confidence in his weapons ability to put the rounds where his sight is pointing.
• The Geissele SSA-E trigger allows the shooter to slap through the trigger pull on close in shots but also set up a long range shot with a crisp trigger break.
• A full force hammer spring is used for quick locktime and positive ignition of all types of ammo. No lightened hammer spring is used.
• The hammer is lighter than a standard AR15 hammer. The lightened hammer favorably decreases locktime over a standard hammer from 8.5 to 5.1 ms and increases accuracy of the weapon.

2. Advantages for the Armorer
• The Geissele SSA-E is a simple design that is very similar tothe original M16 trigger. The number of parts is identical.
• There are no adjustment screws to come loose.
• All springs are captive; they will not get lost during disassembly in the field.
• The entire trigger can be dissembled for cleaning (no rivets or staked parts).
• The trigger can be installed without removing the safety.
• Sear engagement is pre-set from the factory.

• Hammer and trigger pins are a close slip fit into nominal receiver holes so the trigger can be installed and removed with rudimentary tools.
• Triggers come with a slave pin for the trigger/disconnector assembly for easy installation.

3. Safety Advantages
• The Geissele SSA-E is a 2 stage trigger where there is
generous overlap of the sear surfaces which contributes to safety and
a low tendency of any inadvertent movement of the trigger to discharge
the weapon.
• The Geissele SSA-E has a patented pseudo sear that is almost identical to the standard AR15 single stage sear. However, this
secondary sear has surfaces that never touch during normal operation. This sear prevents the hammer from falling unless the trigger is pulled.
• The secondary safety sear contributes to shooter confidence in dynamic/vehicle situations where a fellow shooter’s muzzle may cover him. There is firm knowledge that even with the safety in the fire position the weapon can never discharge unless the trigger is pulled.
• Trigger timing is robust and parts have been sized to operate with a certain amount of wear to the working surfaces. The trigger is
designed to operate in dusty, abrasive environments that cause wear.

Feel free to ask all the question you have. We take the time to answer them all!

The Geissele Super Semi-Automatic (SSA) Trigger is the semi-auto only version of a select fire trigger that Geissele makes for customers in the U.S. Special Operations community. The SSA is a non-adjustable combat trigger, it is not a match trigger. The second stage break is like a carrot rather than an icicle. Suitable for Close Quarters Battle (CQB) and mid-range carbine work, the Geissele SSA is also the perfect trigger for Squad Designated Marksman (SDM) rifles. A short summary of the Geissele SSA features and advantages are:

1. Performance Advantages for the Shooter

• The Geissele SSA has a pull weight of about 4.5lb. 2.5 lbs on the first stage and 2lb on the second stage. The pull weights and sear engagement are non adjustable by the shooter.
• Trigger and hammer are made from quality tool steel
• Sear surfaces are cut by a wire edm machine. Sears cut this way are very accurate and the non-directional surface finish of the wire edm gives a smooth trigger pull without the associated grittiness of directional machining marks left by a milling cutter.
• The initial force needed to start the disengagement of the sear surfaces is low and the force linearly increases at a low rate. This helps the shot to fall at the initial point of aim and aids in building shooter confidence in his weapons ability to put the rounds where his sight is pointing.
• The Geissele SSA trigger allows the shooter to slap through the trigger pull on close in shots but also set up a long range shot with a crisp trigger break.
• A full force hammer spring is used for quick locktime and positive ignition of all types of ammo. No lightened hammer spring is used.
• The hammer is lighter than a standard AR15 hammer. The lightened hammer favorably decreases locktime and increases accuracy of the weapon, especially for snap shots.

2. Advantages for the Armorer

• The Geissele SSA is a simple design that is very similar to the original M16 trigger. The number of parts is identical.
• There are no adjustment screws to come loose.
• All springs are captive; they will not get lost during disassembly in the field
• The entire trigger can be dissembled for cleaning (no rivets or staked parts)
• The trigger can be installed without removing the safety
• Sear engagement is pre-set from the factory.
• Hammer and trigger pins are a close slip fit into nominal receiver holes so the trigger can be installed and removed with rudimentary tools.
• Triggers come with a slave pin for the trigger/disconnector assembly for easy installation.

3. Safety Advantages

• The Geissele SSA is a 2 stage trigger where there is generous overlap of the sear surfaces which contributes to safety and a low tendency of any inadvertent movement of the trigger to discharge the weapon.
• The Geissele SSA has a patented pseudo sear that is almost identical to the standard AR15 single stage sear. However, this secondary sear has surfaces that never touch during normal operation. This sear prevents the hammer from falling unless the trigger is pulled.
• The secondary safety sear contributes to shooter confidence in dynamic/vehicle situations where a fellow shooter’s muzzle may cover him. There is firm knowledge that even with the safety in the fire position the weapon can never discharge unless the trigger is pulled.
• Trigger timing is robust and parts have been sized to operate with a certain amount of wear to the working surfaces. The trigger is designed to operate in dusty, abrasive environments that cause wear.

Feel free to ask all the question you have. We take the time to answer them all!

The Geissele Super Select-Fire (SSF) Trigger is a select-fire combat trigger that Geissele Automatics developed for the U.S. Special Operations Community. The SSF is a non-adjustable combat style two-stage trigger. In semi-automatic mode, the SSF is a precision two-stage trigger that allows precise and accurate trigger control. In fully-automatic mode, the SSF is a single-stage trigger with a smooth, continuous trigger pull and abrupt hammer release.

Platform:M16/M4

Type: 2 Stage (Single stage in full auto)

1st stage weight range: 2.75-3 lbs

2nd stage weight range: 1.5-1.75 lbs

Total pull weight range: 4.25-4.75 lbs

Full auto mode oull weight: 6.0 lbs

Adjustable: NO

Trigger bow type: M4 curved

Pin size: Mil-spec

Feel free to ask all the question you have. We take the time to answer them all!

Feel free to ask all the question you have. We take the time to answer them all!

Geissele MK2 Mod 1 Rail Section Kit

New Old Inventory

HI-SPEED NATIONAL MATCH LARGE PIN

The Geissele Hi-Speed National Match Trigger is designed for competitive shooting and semi-automatic sniper weapons. It is a fully adjustable trigger that can be tuned by the shooter to suit individual tastes. This gives the Geissele Hi-Speed flexibility to cover a broad range of shooting styles. From Benchrest and Varmint shooting to CQB entry work the Geissele Hi-Speed does it all, does it well, does it safely and reliably.

We have three different trigger models in the Hi-Speed line:

Service Rifle, Designated Marksman Rifle (DMR) and Match Rifle

PULL WEIGHTS:

Service Rifle 1^st Stage: 3.2 - 5lbs 2^nd Stage: .5 - 1.5lbs. Total: 3.7 - 6.5lbs

DMR 1^st Stage: 2.5 - 3.6lbs 2^nd Stage: .5 - 1.5lbs. Total: 3.0 - 5.1lbs

Match Rifle 1^st Stage: 1.5 - 2.5lbs 2^nd Stage: .4 - .9lbs. Total: 1.9 - 3.4lbs

Feel free to ask all the question you have. We take the time to answer them all!