|
|
|
|
PA-ALBC-01
|
Primary Arms AutoLive Battery Cap
|
Bring the power of AutoLive to your favorite optics! The AutoLive Battery Cap is compatible with many of the industry’s most popular optics and brands, allowing you to improve their performance with motion-sensing illumination control. If your current optic has short battery life, or if you want ‘always-on’ storage for home defense, the AutoLive Battery Cap is the perfect upgrade for you.
- Integrated AutoLive motion sensing technology
- Instantly turns on optic illumination when you pick up your firearm
- Low profile design
- Extends battery life
Compatibility:
- Primary Arms SLx 1-8×24 FFP & SFP
- Primary Arms SLx 1-10×28 SFP
- Primary Arms SLx 1-6×24 SFP Gen III and IV
- Primary Arms SLx 1-6×24 FFP
- Sig Optics Tango6® MSR 1-6x24mm
- Vortex Strike Eagle® 1-6 SFP
- Vortex Strike Eagle® 1-8 SFP
|
Regular Price |
$50.00
|
|
|
|
|
|
|
|
MAG939
|
Magpul MS1 QDM Sling
|
The Magpul® MS1 QDM Sling further enhances one of the most versatile line of rifle slings by including factory-installed Magpul QDM quick-disconnect swivels. As a heavy-duty replacement for the typical pushbutton swivel, the Magpul QDM offers an innovative low-profile design, singlehanded manipulation, a superior corrosion-resistant Melonite® finish, and a high-strength, freely rotating bale that canalizes sling webbing to prevent rollover. This sling system not only provides the strength, speed and security of Magpul QDM hardware, but is also optimized for dedicated two-point sling functionality built around the streamlined MS1 Slider.
Once set, this system allows for rapid adjustments to either lengthen or shorten the sling without slippage, tails, loops or other potential snag hazards. In a two-point role, the MS1 allows seamless shoulder transitions, fast adjustability for hands-free rifle carry and shooting support from various positions. The Magpul MS1 QDM Sling retains all of the original MS1 functionality and is fully adaptable for one-point applications with a series of adapters (sold separately) based on the MS3® and MS4® Slings.
In testing, the MS1 Sling survived tens of thousands of cycles in wet, dry and sandy conditions, static-load testing without slippage for 72 hours, and weighted six-foot dynamic drop tests. In addition to the controlled lab tests, we also swam with it, jumped with it, hunted with it, hiked into the mountains with it, and—most importantly—shot with it in a variety of rugged field conditions.
The Magpul MS1 QDM Sling is made in the USA and is fully Berry Amendment compliant.
|
Regular Price |
$74.00
|
|
|
|
|
|
|
|
MAG545
|
Magpul MS1 Padded Sling
|
Product Details
The MS1 Padded Sling is an optimized, dedicated two-point sling that serves equally well in a one-point role when using optional adapters. Built around our MS1 slider, this system provides rapid adjustments to either lengthen or shorten the sling with no slipping once set, and no tails, loops, or other potential snag hazards. In a two-point role, the MS1 allows easy shoulder transitions, rapid adjustability for hands free rifle carry and shooting support from various positions. The MS1 system also has a series of adapters that are sold separately and based on the MS3® and MS4™ slings. By adding the appropriate adapter (available with Paraclip™ or QD Sling Swivel) for the sling, you can easily add one-point functionality to your MS1.
|
Regular Price |
$57.00
|
|
|
|
|
|
|
|
MAG518
|
Magpul MS4 Dual OD Sling GEN2
|
Filling the same mission requirement as the standard MS3 Sling, the MS4 can quickly switch between one-point and two-point configuration. The MS4 maintains material construction and specifications identical to that of the standard MS3, but instead of Magpul Paraclips™, it features two heavy-duty push-button QD Sling Swivels, along with a custom steel connection ring to allow one-to-two-point convertibility. This modification allows compatibility with QD sling cups commonly found on lower receivers, receiver end plates, buttstocks, and many low-profile forward QD Sling Mounts.
The MS4 Dual QD GEN2 incorporates a new, low profile quick-adjust slider which minimizes bulk and allows for secure, yet effortless, sling adjustment. Webbing length has also been increased for a comfortable fit with all body types and armor configurations.
Made in U.S.A. and 100% Berry Amendment compliant.
|
Regular Price |
$65.00
|
|
|
|
|
|
|
|
MAG515
|
Magpul MS3 Single QD Sling GEN2
|
Filling the same mission requirement as the standard MS3 Sling, the MS3 Single QD can quickly switch between one-point and two-point configuration. The MS3 Single QD maintains material construction and specifications identical to that of the standard MS3, but features a heavy-duty push-button QD Sling Swivel for the one-point (rear) weapon attachment rather than the Magpul Paraclip™.
This modification allows compatibility with QD sling cups commonly found on lower receivers, receiver end plates, and buttstocks. The MS3 Single QD GEN2 incorporates a new low profile quick-adjust Slider which minimizes bulk and allows for secure, yet effortless, sling adjustment. Webbing length has also been increased for a comfortable fit with all body types and armor configurations.
Made in U.S.A. and 100% Berry Amendment compliant.
|
Regular Price |
$55.00
|
|
|
|
|
|
|
|
MAG514
|
Magpul MS3 Sling
|
Product Details
Driven by the operational experience of Magpul Core™ instructors, the MS3 Multi-Mission Sling System was designed to give a versatile weapon-retention solution for a multitude of tactical environments and missions. As a standalone product, the rapidly-convertible MS3 allows an operator to leverage the maneuverability of one-point attachment for direct action, or two-point attachment for stability. Single-hand adjustments and quick-release, positive-locking hardware provide flexibility and durability in a truly adaptable sling system. Used in conjunction with the Magpul ASAP® plate (sold separately), the MS3 enables seamless transitions into an array of shooting positions without getting bound or fouled. The MS3 concept allows switching from Weapon Shoulder to Reaction Shoulder for shooting around corners, under vehicles, or to minimize exposure. The MS3 can also increase operator survivability by keeping the weapon in the fight in case of injury to the operator's shoulder, arm, or hand. The MS3 GEN 2 incorporates a new low profile quick-adjust Slider which minimizes bulk and allows for secure, yet effortless, sling adjustment. Webbing length has also been increased for a comfortable fit with all body types and armor configurations.
Made in U.S.A. and 100% Berry Amendment compliant.
|
Regular Price |
$48.00
|
|
|
|
|
|
|
|
MAG513
|
Magpul MS1 Sling
|
Product Details
The MS1 Sling is the most versatile addition to the Magpul® line of rifle slings. This sling system starts as an optimized, dedicated two-point sling that serves equally well in a one-point role when using optional adapters. Built around our MS1 slider, this system provides rapid adjustments to either lengthen or shorten the sling with no slipping once set, and no tails, loops, or other potential snag hazards. In a two-point role, the MS1 allows easy shoulder transitions, rapid adjustability for hands free rifle carry and shooting support from various positions. The MS1 system also has a series of adapters that are sold separately and based on the MS3® and MS4™ slings. By adding the appropriate adapter (available with Paraclip™ or QD Sling Swivel) for the sling, you can easily add one-point functionality to your MS1.
In testing, the sling had to survive tens of thousands of cycles in wet, dry and sandy conditions, static load testing without slippage for 72 hours and weighted six foot dynamic drop tests. In addition to the controlled lab tests, we also swam it, jumped it, hunted with it, hiked into the mountains with it, and most importantly shot with it in a variety of rugged field conditions.
The MS1 Sling is made entirely in the USA, and is fully Berry Amendment compliant.
|
Regular Price |
$32.00
|
|
|
|
|
|
|
|
MAG495
|
Magpul Hunter 700 Stock
|
Product Details
Made from reinforced polymer and an anodized aluminum bedding block, the Magpul Remington 700 Hunter Stock offers users a cost effective replacement featuring fully adjustable length of pull, comb height, and enhanced ergonomics.
Compatible with Remington 700 Short Actions, this stock requires no bedding and is a true “drop-in” solution for the end user*. This stock is also M-LOK compatible to accept a broad range of accessories.
Also available is our Bolt Action Magazine Well, which allows the rifle to be used with detachable box magazines without the need for custom inletting.
Made in U.S.A.
FEATURES
- Compatible with standard Remington 700 pattern short actions with stock Remington hinged floorplates*
- Easily upgradeable to removable AICS-spec magazines (5.56x45 or 7.62x51 pattern) with the affordable Magpul Bolt Action Magazine Well
- Reinforced polymer shell with Type III hard anodized, machine finished, A380 cast aluminum V-bedding block
- Tapered Beam design provides good rigidity through forend
- Free-floats ALL factory Remington barrels including aftermarket profiles up to a Medium Palma (0.920" dia. 5.50" forward of the breech)
- 60 degree grip angle from bore axis
- Adjustable LOP from 13.0”-15.0” with included 0.50” Spacers
- Rubber recoil butt-pad included and optional OEM Butt-Pad Adapter available for use with aftermarket pads
- Optional High Cheek Riser Kit with 0.50" and 0.75" Risers to adjust cheek weld (Stock comes pre-fitted with 0.25" Riser)
- Accepts factory and most aftermarket triggers
- M-LOK™ slots on forend sides and bottom for a wide variety of accessory and sling mounting options
- Three dimpled drill points to install optional standard swivel studs (#10-32 x 3/8” long dome stud)
- Push-button QD swivel compatibility in rear with optional Sling Mount Kits
- Left and Right rear 1-1/4” Footman’s Loops
|
Regular Price |
$245.00
|
|
|
|
|
|
|
|
MAG483
|
Magpul Hunter 700L Stock- Remington 700 Long Action
|
Made from reinforced polymer and an anodized aluminum bedding block, the Hunter 700L Stock – Remington 700 Long Action offers users a cost effective upgrade featuring fully adjustable length of pull, comb height, and enhanced ergonomics.
Compatible with Remington 700 Long Actions, this stock requires no bedding and is a true “drop-in” solution*. The 700L is also M-LOK® compatible to accept a broad range of accessories.
Also compatible with our Magpul Bolt Action Magazine Well 700L, which allows the rifle to be used with detachable AICS-spec box magazines without the need for custom inletting.
Made in the USA.
|
Regular Price |
$266.00
|
|
|
|
|
|
|
|
JPSCS2-9-5H2
|
Silent Captured Spring 9mm Enhanced Version GEN 2
|
Silent Captured Spring (patented)
9mm AR Enhanced Version
The 9mm Silent Captured Spring is a drop-in component that softens recoil and reduces cycling noise and vibration in your 9mm carbine. The result is a refined rifle that's a pleasure to shoot. Paired with our 9mm bolt assembly, you have the most reliable 9mm operating system available.
The 9mm Enhanced Version provides the same buffering mass as our standard 9mm SCS. At the same time, we've increased overall bolt mass slightly with more room for increased weight if needed. The result is even softer recoil thanks to a further delay in blowback.
The Enhanced Version 9mm SCS is the best option for reliability and durability with hotter ammunition. It's also the best pairing for use with non-JP bolt assemblies where a central mass needs to be removed. Removing this mass reduces overall reliability from the operating system, which can be offset by the addition weight in the SCS.
Package includes spring and instruction sheet.
Features:
- Simple, drop-in installation
- Quieter, smoother operation thanks to reduced vibration and friction
- Softened recoil, both felt and actual
- Completes the roller-bearing-like perfection of the JP operating system
- Sufficient deadblow effect to avoid bolt bounce
- Mass tunable via alternate masses
- Enhanced reliability and durability when shooting hotter loads
- Best SCS option for use with non-JP 9mm bolt assemblies
- American made
|
Regular Price |
$205.00
|
|
|
|