308 Cam Pin 

Choose Phalanx (black nitride) or SuperMatch (nickel boron) finish.

Complete DPMS 308 bolt by Precision Firearms made to our specifications. 9310 steel, Shot peened and hardened. Precision Turned to Prefection, just like we ordered. Available in Phalanx (Black Nitride) or SuperMatch (Nickel Boron).

Complete bolt with extractor, rings, and ejector.

Optional: Carrier Assembly - includes carrier with Staked Key, Firing Pin, Cam, and Retainer

Complete 223/5.56 Extractor by Precision Firearms. Available in Phalanx (Black Nitride) or Super Match (Nickel Boron).

Optional: Extra Strength Extractor Spring and Buffer

Complete, 5.56 AR-15 bolt and carrier assembly coated in Nickel Boron. These are fully assembled and ready to go. Drop it in your Milspec AR  and you’re ready to shoot. Precision-machined carrier and bolt manufactured for us to our specifications with our drawing with tolerances allowed for Nickel Boron Coating. All metals, Hardness, and Coating meet or exceed Mil-spec. Carrier are faceted to give that extra custom look to the rifle. No sharp edges to aid in smoothness and reliablity. Slight carbon and brass fouling may be present from test firing to insure you will not have problems.

Lifetime Guarantee with Receipt.

We've done it again! Heavy Walled Upper Receiver precision machined from 7075 T6 Billet Aluminum. Much stiffer and stronger than a Forged Upper. Very close attention to detail is evident in this upper. Each Unit is serial numbered to help with quality control and responsibly of our machine Techs and goes through a comprehensive 25 Step Quality inspection. Each unit is engraved with 7075 so there is no question as to material used. The bore through center is Roller Burnished to create a Super Smooth surface for the carrier system. Notice relief cuts along rail to help prevent damage to rail when mounting accessories (no more white lines along edge of rail). Bolt catch area is enlarged to allow for use of ambi or extended bolt releases. INCLUDES Super Match carrier (no Bolt).

• No Forward Assist. Not needed with Right Side Reciprocating charging handle.
• No Shell Deflector or Port Cover
• Our Carrier modified to work with the side charge.
• M4 Feed Ramps
• Still accepts top standard charging handle for back-up.

Feel free to ask all the question you have. We take the time to answer them all!

The Geissele Gas Block Pin Punch Set is made specifically for the removal and installation of the 0.078" roll pin that secures the gas tube to the gas block of an AR-15/AR-10. Removal of a rusted-in gas block roll pin has always been a challenge since there are no commercial pin punches in 0.078" diameter. Additionally, 1/16" (0.062") punches have a tendency to bend and very few starter punches are available in 1/16" diameter. 

The Geissele Gas Block Pin Punch Set makes gas block work a whole lot easier. The first punch to grab when removing the roll pin is the Starter Punch. This is the punch with the long, tapered end. The long taper is much more resistant to bending and buckling than the straight shank of the Pin Punch. Use the Starter Punch to get the roll pin moving. Then, use the Pin Punch to drive the roll pin out completely. The Geissele Gas Block Pin Punch Set is  made from properly hardened and tempered 01 tool steel. The Gas Block Pin Punch Set is considered a consumable item, meaning they will eventually wear out and will need to be replaced.

We've done it again. Heavy Walled Lighter Weight Upper Receiver precision machined from 7075 T6 Billet Aluminum. Much stiffer and stronger than a Forged Upper. Very close attention to detail is evident in this upper. Each Unit is serial numbered to help with quality control and responsibly of our machine Techs and goes through a comprehensive 25 Step Quality inspection. Each unit is engraved with 7075 so there is no question as to what material we are using. The bore through center is Roller Burnished to create a smooth surface for the carrier system. The Shell deflector is positioned at 60 Degrees and is slightly curved to help with deflection while reducing damaged brass. Notice relief cuts along rail to help prevent damage to rail when mounting accessories (no more white lines along edge of rail). Bolt catch area is enlarged to allow for use of ambi or extended bolt releases.

Also Includes M4 Feedramps!

Finished with Milspec Type III Hardcoat.

Weight: 12 Oz. Loaded

Sold with Port Cover and Forward assist installed

Feel free to ask all the question you have. We take the time to answer them all!

The MK14 is the latest entry to the Geissele line up of Super Modular Rails. The new handguard design offers a smaller diameter and overall height to create a slimmer package. Included with the MK14 Super Modular Rail is an updated version of the proven Geissele Barrel Nut design, not only providing ease of installation but superior rigidity. The long surface contact of the 2.25” barrel nut interfaces with the receiver creating a platform that can be trusted to be straight and true the entire length of the free float rail. The MK14 is 3d precision machined using 6061-T6 Aluminum due to its strong, rigid and lightweight properties. 

Utilizing Magpul’s M-LOK technology in the 3, 6, and 9 o’clock positions allow the end user full customization and modularity of their rifle to securely mount lights, bipods and other firearm accessories. The Geissele MK14 Super Modular rail is finished in a durable and long lasting Type 3 Hardcoat Anodized available in either Black or Geissele’s DDC finish.

This new Intermediate length Gen III Free-Float Carbon Fiber Delta forearm is in the triangular shape (Delta). This configuration is designed to work with most piston or op-rod systems out in the market today. The Delta uses the same easy locking system

PRI DPMS GenIII 308 Delta Carbon Fiber Forearm Carbine length in black or flat dark earth. This Free floated handguard is constructed of a combination of Carbon fiber tube with an Aluminum collar and end cap, with a steel barrel nut. The forearm has additional over the barrel clearance. The forearm comes with 4 rails a 5.5" rail on top and (3) 3" rails at 3,6, and 9 O'clock positions. The overall length is 9.25" and weighs 1.03 Lbs.