VG6 Precision manufactures some of the best muzzle devices in the industry. Established in 2013, VG6 merged with Aero Precision, a premium AR-15 manufacturer, in 2015. An important milestone for the company, this acquisition allows VG6 and Aero Precision to provide competitive pricing on a premium selection of muzzle devices.

The GAMMA 300BLK is a hybrid muzzle brake and compensator. Virtually eliminating recoil and muzzle climb, the device allows lightning fast follow up shots. Tuned for versatility, the GAMMA 300BLK is optimized for 10.5" to 18.5" barrels.

NOTE: Anti-seize grease recommended for installation.


Features:

• 300 BLK/.308 Win
• 5/8x24 thread pitch
• 17-4ph heat treated stainless steel
• Black nitride finish
• Includes crush washer
• Surface hardness: 68RC
• Length: 1.72”
• Weight: 1.9 oz

This M5 Lower Parts Kit includes the components needed to assemble an Aero Precision M5 Lower Receiver. It features a Magpul MOE® Grip. See below for a full list of included components.

*M5 Specific Parts include: M5 Takedown Pin, M5 Pivot Pin, M5 Bolt Catch and Extended Magazine Catch Button.

Includes:

• Magpul MOE® Grip in Black or FDE
• *M5 (.308) Takedown Pin
• *M5 (.308) Pivot Pin
• Takedown/Pivot Detent
• Takedown/Pivot Spring
• *M5 (.308) Bolt Catch
• Bolt Catch Buffer
• Bolt Catch Roll Pin
• Bolt Catch Spring
• *Extended Magazine Catch Button
• Magazine Catch Body
• Magazine Catch Spring
• Buffer Retainer
• Buffer Retainer Spring
• Safety Selector
• Safety Selector Spring
• Safety Selector Detent
• 4-40 Set Screw (for threaded takedown pin detent hole)

These gas blocks along with our gas tubes create an efficent and reliable gas system for your AR15 or AR 308 rifle build.

Features:

• Fits barrels with .875 Outer Diameter
• Constructed from 4140 hardened steel
• No Aero Logo
• Nitride coating
• Low profile for easy fitment
• Set Screws are Steel 10-32 x 3/16 Knurled Cup Point
• Made in the USA
• *Roll pin not included*

The Aero Precision low profile gas block is manufactured from hardened 4150 chrome moly steel with a corrosion resistant salt bath nitride finish. With a low-profile design to fit under almost any free float handguard on the market, so you can fully customize your rifle. These AR-15 gas blocks are made in the U.S.A. and include a set of steel 10-32 x 3/16 knurled cup point set screws for securely attaching them to your barrel. With precise machining tolerances, you can expect perfect match to your barrel with .625” gas block journal and is compatible with all rifle and carbine length gas tubes. The time is now to upgrade your AR-15 and the Aero Precision low profile gas block is the solution if you plan on free floating your barrel.

NOTE: Aero Precision does not recommend the use of red thread locker on the set screws. If you decide to use thread locker, they recommend using a non-permanent variety.

Features:

• No logo
• Machined from 4150 chrome moly steel
• .625” gas seat diameter
• Set Screws: 10-32x3/16 knurled cup point
• .458” set screw spacing for dimpled barrels
• Salt Bath Nitride Finish
• Low profile for easy fitment
• Roll pin not included.
• Weight: 1.6 oz

These gas blocks along with our gas tubes create an efficient and reliable gas system for your AR15 or AR 308 rifle build.

Features:

• Fits barrels with .936 Outer Diameter
• Constructed from 4140 hardened steel
• Phosphate coating
• Low profile for easy fitment
• Set Screws are Steel 10-32 x 3/16 Knurled Cup Point
• Made in the USA
• *Roll pin not included*

The Aero Precision low profile gas block is manufactured from hardened 4150 chrome moly steel with a tough phosphate finish. With a low-profile design to fit under almost any free float handguard on the market, so you can fully customize your rifle. These AR-15 gas blocks are made in the U.S.A. and include a set of steel 10-32 x 3/16 knurled cup point set screws for securely attaching them to your barrel. With precise machining tolerances, you can expect perfect match to your barrel with .750” gas block journal and is compatible with all rifle and carbine length gas tubes. The time is now to upgrade your AR-15 and the Aero Precision low profile gas block is the solution if you plan on free floating your barrel.

NOTE: Aero Precision does not recommend the use of red thread locker on the set screws. If you decide to use thread locker, they recommend using a non-permanent variety.

Features:

• No logo
• Machined from 4150 chrome moly steel
• .750” gas seat diameter
• Set Screws: 10-32x3/16 knurled cup point
• .500” set screw spacing for dimpled barrels
• Phosphate Finish
• Low profile for easy fitment
• Roll pin not included.
• Weight: 1.6 oz

Made in the USA

This Aero Precision Mid-Length Length Gas Tube is made from stainless steel and finish with a durable Melonite coating. Designed for AR-15 or AR-10’s with a rifle length gas system and includes a roll pin for installation.

Features:

• Mid-Length – 11.75”
• Stainless Steel with Melonite coating
• Includes roll pin
• Made in the U.S.A.

Aero Precision takes some of the most state-of-the-art manufacturing techniques and equipment derived from their work in the aerospace industry and applies it to their products in the firearms industry. They have utilized their knowledge from years of building aircraft components to design and engineer AR-15 handguards, receiver sets, scope mounts, and more. They treat every product as if it were a precision flying machine and adhere to strict quality standards to ensure law enforcement, military, and civilian customers receive a product they can rely on.

This Aero Precision Pistol Length Gas Tube is made from stainless steel and finish with a durable Melonite coating. Designed for AR-15 or AR-10’s with a rifle length gas system and includes a roll pin for installation.


Features:

• Pistol Length – 6.7”
• Stainless Steel with Melonite coating
• Includes roll pin
• Made in the U.S.A.

Our upper parts kit includes the parts you need to assemble your AR15 Upper Receiver.

Includes:

• Forward Assist Assembly
• Forward Assist Spring
• Forward Assist Roll Pin
• Ejection Port Cover Door
• Ejection Port Cover Rod with c-clip
• Ejection Port Cover Spring

Made in the USA