Description

Easily release bolt with either left or right hand. Streamlines firearm clearing and reloads after a malfunction. Improved control without hand changeovers.  Made in the U.S.A. *Lifetime limited warranty, see www.troyind.com for details.

We at Precision Firearms have tested this product and like it a lot - we recommend it! Similiar to the Magpul BAD Lever but built stronger!

Feel free to ask all the question you have. We take the time to answer them all!

Durability and dead-on accuracy have made Troy Industries Folding BattleSights the hands-down choice of Special Ops and tactical users worldwide. Easy to install and to deploy, with no levers or springs to fumble with, these sights position apertures at exact factory height. A stainless-steel cross-locking system ensures sights remain upright and zeroed under extreme combat conditions. A push of a button folds the sights securely out of the way until you need them again (they fold to a profile of just 0.460). Troy BattleSights feature a zero-canting attachment system for use on all military and aftermarket receivers.

Description

Durability and dead-on accuracy have made Troy Industries Folding BattleSights the hands-down choice of Special Ops and tactical users worldwide.

Features

• No tools are required for adjustment
• Each click equals .50 MOA of adjustment
• Blackened Stainless Steel
• MIL-SPEC Type III Hard Coated
• T6 Aircraft Aluminum construction
• Available in Black and Flat Dark Earth
• Made in the USA

Feel free to ask all the question you have. We take the time to answer them all!

Rear Folding Di-Optic Tritium BattleSight

These sights provide lightning fast target acquisition and are manufactured to exceed military specs. The optically engineered apertures center your eyes instantly and effortlessly providing a clearer target picture than with round apertures.

The sights feature two settings, one for up to 300 meters and a second for up to 550 meters. This versatility makes the DOA ideal for military, law enforcement and home defense applications. These advanced sights have been extensively field-tested and, like all Troy Industries products, are Battle Ready. Count on it.

Note: Sight is designed to work on same plane rail systems only. Will not work with a railed gasblock that is higher or lower than the receiver.

Feel free to ask all the question you have. We take the time to answer them all!

Durability and dead-on accuracy have made Troy Industries Folding BattleSights the hands-down choice of Special Ops and tactical users worldwide. Easy to install and to deploy, with no levers or springs to fumble with, these sights position apertures at exact factory height. A stainless-steel cross-locking system ensures sights remain upright and zeroed under extreme combat conditions. A push of a button folds the sights securely out of the way until you need them again (they fold to a profile of just 0.460). Troy BattleSights feature a zero-canting attachment system for use on all military and aftermarket receivers.

Description

Durability and dead-on accuracy have made Troy Industries Folding BattleSights the hands-down choice of Special Ops and tactical users worldwide.

Features

• No tools are required for adjustment
• Each click equals .50 MOA of adjustment
• Blackened Stainless Steel
• MIL-SPEC Type III Hard Coated
• T6 Aircraft Aluminum construction
• Available in Black and Flat Dark Earth
• Made in the USA

Feel free to ask all the question you have. We take the time to answer them all!

Bigger calibers shouldn't require bigger rails. For shooters looking for a fast-handling, easy to grasp rail, the Samson SXS-762 Series free-floating M-LOK system is the perfect AR upgrade. Its sleek profile creates a comfortable feel to a wide range of shooters, regardless of your application. The SXS system creates a solid extension of the upper receiver with the benefits of rapid and easy installation thanks to the pre-installed, captured clamping system and Samson barrel nut.

SXS-762H: Armalite AR10 and DPMS "High" receivers with DPMS thread pattern barrel nut (1 7/16" - 16). Fits AR-10 height receivers.

Includes: Hex wrench, barrel nut and barrel nut wrench. 

The Superlative Arms patented “Bleed Off”, direct impingement, gas block for the AR15 platform adjusts the gas flow by bleeding the gas out of the block instead of restricting the flow like conventional adjustable blocks.  Results:

• The pressure used in the block is reduced only to the amount required to drive the bolt carrier. The remaining gas / pressure are bled out of the block allowing the system to run much cleaner and cooler. 
• Reduction of felt recoil.
• Patented adjustment detent is located outside of the block and therefore no contamination.
• The gas adjustment screw does not restrict the gas flow; therefore there is no erosion or seizing of the screw / no loss of detent due to carbon build up.  Although it is removable, we have added a safety mechanism, which stops you from unintentionally backing the screw all the way out.
• When using SBR’s and / or suppressors the bleed off port allows the excessive pressure to be exhausted out of the block reducing blow back. 

The Superlative Arms patented “Bleed Off”, direct impingement, gas block for the AR15 platform adjusts the gas flow by bleeding the gas out of the block instead of restricting the flow like conventional adjustable blocks.  Results:

• The pressure used in the block is reduced only to the amount required to drive the bolt carrier. The remaining gas / pressure are bled out of the block allowing the system to run much cleaner and cooler. 
• Reduction of felt recoil.
• Patented adjustment detent is located outside of the block and therefore no contamination.
• The gas adjustment screw does not restrict the gas flow; therefore there is no erosion or seizing of the screw / no loss of detent due to carbon build up.  Although it is removable, we have added a safety mechanism, which stops you from unintentionally backing the screw all the way out.
• When using SBR’s and / or suppressors the bleed off port allows the excessive pressure to be exhausted out of the block reducing blow back. 

The Single-Stage Precision (SSP) is Geissele Automatics’ first true single-stage trigger for the AR Platform. This drop-in trigger has no take up and a super clean break. The reset is short yet still distinct, giving excellent feedback to the shooter during target engagement. Combining these two capabilities provides the shooter with the confidence necessary when precision and accuracy are essential for the task at hand.

The SSP features superior materials and the most modern manufacturing techniques. The SSP trigger is made from S7 Tool Steel and precision machined from the latest wire EDM technology. All parts are finished in durable corrosion resistant black oxide. The Geissele SSP is a precision trigger, engineered for maximum reliability and repeatability while engaging targets at long distance, whether it’s being used during duty, hunting or target shooting.

The Geissele Super Semi-Automatic (SSA X) Trigger with Lightning Bow is  no longer exclusive to the Super Duty line of firearms! The Geissele Super Semi-Automatic (SSA) X trigger is based on the SSA, a semi-automatic only version of Geissele Automatics’s Super Select-Fire trigger. The SSA is a non-adjustable duty rated trigger that is a precision two-stage trigger that allows precise and accurate trigger control. The SSA’s two-stage design allows the trigger to be light enough for accurate and precise shots, but forgiving enough for frenetic close in work. A short summary of the Geissele SSA X features and advantages are:

Platform: AR15/AR10

Type: 2 Stage

!st stage weight range: 2.75-3 lbs

2nd stage weight range: 1.5-1.75 lbs

Total pull weight range: 4.25- 4.75 lbs

Adjustable: No

Trigger bow type: Lightning Bow

Pin Size: Mil-Spec

Feel free to ask all the question you have. We take the time to answer them all!

The Troy Industries SOCC (Special Operations Compatible Carbine) BattleRail is narrow, sleek, and provides exceptional balance and controllability. Lightweight, with an ultra-low profile, snag-free design, they are ideal for close quarters maneuverability. This BattleRail offers a continuous Picatinny top rail with M-LOK sections at the 3, 6, and 9-o’clock positions. Machined from hardened aircraft aluminum and finished with MIL-SPEC hardcoat anodizing, this rail mounts to a standard barrel nut.


Features:

• No gunsmithing required
• Mounts to standard barrel nut (not included)
• Lightweight and low profile
• M-LOK at the 3, 6, and 9-o'clock positions