The BCMGUNFIGHTER Compensator Mod 1 - 5.56

• Compatible with A2-mounted suppressors due to unique external geometry.
• Tuned slots and interior cone offer maximum in recoil mitigations, compensation of muzzle-rise, and flash reduction.
• Dual action brake minimizes side pressure and designed to have much less noise associated with typical compensators. Makes it perfect for working in teams for CQB. It is a compensator that is built for the 21st Century Gunfighter!
• Stainless Steel construction for maximum corrosion resistance
• Predrilled hole at the base for permanent installation.
• Includes a Crush Washer
  
• Should be installed by a qualified military armorer.
  

Threaded 1/2 x 28 for 5.56mm AR15 platforms.

• Extended version of the BCMGUNFIGHTER MOD 0 - 5.56.
• Mount per BATF specs to bring your 14.5 inch barrel over 16 inches (non-NFA)

Feel free to ask all the question you have. We take the time to answer them all!

• Exterior dimensions consistent with Mil-specs for mounting BFA or flash hider mounted suppressors.
• Tuned slots and interior cone offer maximum in recoil mitigations, compensation of muzzle-rise, and flash reduction.
• Designed to have much less side blast and noise associated with typical compensators. Makes it perfect for working in teams for CQB. It is a compensator that is built for the 21st Century Gunfighter!
• Stainless Steel construction for maximum corrosion resistance
• Includes a Crush Washer
  
• Should be installed by a qualified military armorer.

Feel free to ask all the question you have. We take the time to answer them all!

The highly effective Epsilon from VG6 Precision is now available with a new, more slim design! The VG6 Epsilon Slim comes in at just .745" across, allowing users with 14.5" barrels to use standard .750" gas blocks without having to remove the muzzle device.

NOTE: Anti-seize grease recommended for installation.

Features:

• 5.56 NATO
• 1/2x28 thread pitch
• 17-4ph heat treated stainless steel
• Black nitride finish
• .745" outer diameter
• Includes crush washer
• Surface hardness: 68RC
• Length: 2.21”
• Weight: 1.6 oz
• Made in the U.S.A.

The Delta 556 Compensator is chamberless, sending combustion gasses downrange for reduced concussion felt by the shooter and reduced recoil performance comparable to a standard A2 birdcage, while muzzle flash is virtually eliminated.

NOTE: Anti-seize grease recommended for installation.


Features:

• .223 Rem/5.56 NATO/.224 Valkyrie
• 1/2x28 thread pitch
• 17-4ph heat treated stainless steel
• Black nitride finish
• Includes crush washer
• Surface hardness: 68RC
• Length: 2.21”
• Weight: 2.56 oz
• Made in the U.S.A.

VG6 Precision manufactures some of the best muzzle devices in the industry. Established in 2013, VG6 merged with Aero Precision, a premium AR-15 manufacturer, in 2015. An important milestone for the company, this acquisition allows VG6 and Aero Precision to provide competitive pricing on a premium selection of muzzle devices.

The GAMMA 300BLK is a hybrid muzzle brake and compensator. Virtually eliminating recoil and muzzle climb, the device allows lightning fast follow up shots. Tuned for versatility, the GAMMA 300BLK is optimized for 10.5" to 18.5" barrels.

NOTE: Anti-seize grease recommended for installation.


Features:

• 300 BLK/.308 Win
• 5/8x24 thread pitch
• 17-4ph heat treated stainless steel
• Black nitride finish
• Includes crush washer
• Surface hardness: 68RC
• Length: 1.72”
• Weight: 1.9 oz

Own the world's most effective flash hider. The proprietary features eliminate muzzle flash, even on CQB-length barrels. The BLACKOUT® is inherently stronger and more impact resistant than four prong designs, while not being subject to the rapid erosion of closed-ended units. A high strength corrosion-resistant aerospace alloy, and ultra-hard Nitride finish provide the highest level of durability. Military tested and selected. This is the non-mount version for use without a silencer.

The BLACKOUT® flash suppressor is the most efficient design available. The proprietary features eliminate muzzle flash, even on CQB-length barrels. The BLACKOUT® is inherently stronger and more impact resistant than four prong designs, while not being subject to the rapid erosion of closed-ended units. A high strength corrosion-resistant aerospace alloy, and ultra-hard Nitride finish provide the highest level of durability. Military tested and selected.

The PF NOX (Latin for night) is made by us for Match Rifles needing a Flash hider that does not affect accuracy. Available in Stainless, Bead Blast, or Phalanx (Black Nitride) coating.

Stainless - 1/2x28

Stainless - 1/2x36

Stainless - 5/8x24

Phalanx - 1/2x28

Phalanx - 1/2x36

Phalanx - 5/8x24

Precision Firearms LMD Brake

LMD- Level Muzzle Device for Normal Standard .740 Diameter Barrels. Typical AR Barrel.

Tapered Muzzle end is .725". Large Diameter is .990". Length is 2 inches.

This is our own in house machined Billet brake. Made from 416 Stainless. 11 Degree Target Crown.

Top ports are off center to help with countering barrel torque. Includes Shim kit.

Available in:

• For 223 Caliber - 1/2x28
• For 224 Valkyrie Caliber - 5/8x24
• For 6.5 Caliber - 5/8x24
• For 6.5 Caliber -9/16x24
• For 308 Caliber - 5/8x24
• Cerakoted Stainless + $15
• Phalanx (Black Nitride) +$10
• Bead Blasted +$5

Precision Firearms LMD Brake

LMD- Level Muzzle Device for Medium Heavy .875 Diameter Barrels. Typical AR Barrel.

Tapered Muzzle end is for barrels w/ muzzle diameter of .850" - .875"  Diameter is .875". Length is 2 inches.

This is our own in house machined Billet brake. Made from 416 Stainless. 11 Degree Target Crown.

Top ports are off center to help with countering barrel torque. Includes Shim kit.

Available in:

• For 223 Caliber - 1/2x28
• For 224 Valkyrie Caliber - 5/8x24
• For 6.5 Caliber - 5/8x24
• For 6.5 Caliber -9/16x24
• For 308 Caliber - 5/8x24
• Cerakoted Stainless + $15
• Phalanx (Black Nitride) +$10
• Bead Blasted +$5