The next-generation PMAG 30 GEN M3 Window is a 30-round 5.56x45 NATO (.223 Remington) polymer magazine for AR15/M4 compatible weapons that features transparent windows to allow rapid visual identification of approximate number of rounds remaining. Along with expanded feature set and compatibility, the GEN M3 Window incorporates new material technology and manufacturing processes for enhanced strength, durability, and reliability to exceed rigorous military performance specifications.

While the GEN M3 is optimized for Colt-spec AR15/M4 platforms, modified internal and external geometry also permits operation with a range of additional weapons such as the HK" 416/MR556A1/M27 IAR, British SA-80, FN"' SCARN MK 16/16S, and others. Similar to the MOE PMAG, the GEN M3 Window features a long-life USGl-spec stainless steel spring, four-way anti-tilt follower and constant-curve internal geometry for reliable feeding, and simple tool-less disassembly to ease cleaning.

In addition, a redesigned bolt catch notch in the rear of the magazine provides increased bolt catch clearance, while an over-travel stop on the spine helps ensure the magazine will not over-insert on compatible weapons. Low profile ribs and new aggressive front and rear texture gives positive control of the GEN M3 in all environments, and a paint pen dot matrix has been added to the bottom panel of the body to allow easy marking by the end user for identification.

The new, easy to disassemble flared floorplate aids extraction and handling of the magazine while providing improved drop protection, but is slightly slimmer than before for better compatibility with tight double and triple magazine pouches. An included pop-off Impact/Dust Cover can optionally be used to minimize debris ntrusion and protect against potential damage to the top cartridge during storage and transit.

Durable dual-side transparent windows allow for quick determination of approximate number of rounds remaining in the magazine. Utilizing a high visibility indicator coil on the spring and numerical markers on the magazine body, the MagLevelN system provides positive verification without affecting the durability or reliability of the magazine.

Made in the USA.

The PMAG 15 GL9 is a 15-round Glock 9mm handgun magazine featuring a proprietary all-polymer construction for flawless reliability and durability over thousands of rounds.

It includes a high visibility controlled-tilt follower, a stainless steel spring, an easily removable floorplate for cleaning, paint pen dot matrix for mag marking, ridged floorplate edges for better grip, and 15-round indicator windows. The magazine drops free when loaded or unloaded. All with the same boring reliability you expect from an OEM magazine.

The PMAG 15 GL9 is compatible with Glock G19 handguns as well as sub-compact variants with some protrusion below the grip.

Made in the USA

The PMAG 5 7.62 AC is a reliable and durable polymer magazine for .308 Winchester-based family of cartridges and is compatible with short action AICS-spec bottom metal, to include the Bolt Action Magazine Well for the Hunter 700 Stock.

Featuring GEN M3 technology, a paint-pen dot matrix for visual identification, and a flared base plate for positive control and ease of retrieval, the PMAG 5 7.62 AC sets a new standard for bolt action magazines.

Comes standard as a 5-round capacity magazine for hunting regulation compliance, but the follower can be easily modified by the user to increase the capacity to six rounds for field, competition, or combat use.

Made in the USA.

The PMAG 17 GL9 is a 17-round Glock 9mm handgun magazine featuring a proprietary all-polymer construction for flawless reliability and durability over thousands of rounds.

Our Glock magazines come with many of our other platform PMAG features, including a high visibility controlled-tilt follower, a stainless steel spring, a floorplate that's easily removable  for cleaning, a paint pen dot matrix for magazine marking, ridged floorplate edges for better grip, and capacity indicator windows. The PMAG 17 GL 9 drops free whether it's loaded or unloaded. All with the same boring reliability you expect from an OEM magazine.

The PMAG 17 GL9 is compatible with all full-size 9mm Glock handguns, as well as compact and sub-compact variants with some protrusion below the grip.

Made in the USA

The 7.62x51 NATO (.308 Winchester) PMAG 25 LR/SR GEN M3 Window is a lightweight, cost effective, high reliability magazine for SR25/M110 pattern rifles featuring true 25-round capacity, constant-curve body, anti-tilt follower, and snap on Impact/Dust Cover.

Designed specifically for SAAMI-spec ammunition, the PMAG 25 LR/SR also features transparent MagLevel™ windows to allow rapid visual identification of approximate number of rounds remaining.

Made in the USA.

The 7.62x51 NATO (.308 Winchester) PMAG 20 LR/SR GEN M3 is a lightweight, cost effective, highly reliable magazine for SR25/M110 pattern rifles. It features true 20-round capacity, a constant-curve body, an anti-tilt follower, and a snap on impact / dust cover.

Our GEN M3 PMAGs feature a long-life stainless steel spring, an anti-tilt, self-lubricating follower, and constant-curve internal geometry for reliable feeding.

Low profile ribs and an aggressive front and rear texture give positive control of the GEN M3 in all environments, and a paint pen dot matrix at the bottom panel of the body to allow easy marking by the end user for identification. The easy-to-disassemble flared floorplate aids extraction and handling of the magazine while providing improved drop protection, and better compatibility with tight double and triple magazine pouches. An included pop-off impact / dust cover can be used to minimize debris intrusion and protect against potential damage to the top cartridge during storage and transit. Its simple, tool-less disassembly makes for for easy cleaning and maintenance.

Designed specifically for SAAMI-spec ammunition, the PMAG 20 LR/SR GEN M3 is less than half the weight of standard issue steel magazines and maintains a service life round count approximately equal to the rifle barrel itself.

Made in the USA.

The 7.62x51 NATO (.308 Winchester) PMAG 10 LR/SR GEN M3 is a lightweight, cost effective, highly reliable magazine for SR25/M110 pattern rifles in the smallest possible magazine size. It features true 10-round capability and includes a constant-curve body, a high-quality stainless steel spring, a self-lubricating anti-tilt follower, and a snap on impact / dust cover.

The easy-to-disassemble flared floorplate aids extraction and handling of the magazine while providing improved drop protection. An included pop-off impact / dust cover can be used to minimize debris intrusion and protect against potential damage to the top cartridge during storage and transit. Its simple, tool-less disassembly makes for for easy cleaning and maintenance.

Ideal for hunting applications with the addition of our Minus Five Round Limiter, for use in states where overall capacity is limited, or with precision platforms using longer than SAAMI-spec match ammunition up to 2.830" OAL. Perfect for use with a bipod or when shooting off of a pack.

Made in the USA.

The next-generation PMAG 40 GEN M3 is a 40-round 5.56x45 NATO (.223 Remington) polymer magazine for AR15/M4 compatible weapons. Along with an expanded feature set and greater compatibility, it incorporates new material technology and manufacturing processes for enhanced strength, durability, and reliability that exceed rigorous military performance specifications.

While the GEN M3 is optimized for Colt-spec AR15/M4 platforms, modified internal and external geometry also permits operation with a range of additional weapons such as the HK® 416/MR556A1/M27 IAR, British SA-80, FN® SCAR~ MK 16/16S, and others.

The PMAG 40 GEN M3 features a long-life stainless steel spring, a four-way anti-tilt follower and constant-curve internal geometry for reliable feeding, and simple tool-less disassembly for easy cleaning.

In addition, a redesigned bolt catch notch in the rear of the magazine provides increased bolt catch clearance, while an over-travel stop on the spine helps ensure the magazine will not over-insert on compatible weapons. Low profile ribs and new aggressive front and rear texture gives positive control of the GEN M3 in all environments, and a paint pen dot matrix has been added to the bottom panel of the body to allow easy marking by the end user for identification.

The new, easy to disassemble flared floorplate aids extraction and handling of the magazine while providing improved drop protection, but is slightly slimmer than before for better compatibility with tight double and triple magazine pouches. An included pop-off impact / dust cover can be used to minimize debris intrusion and protect against potential damage to the top cartridge during storage and transit.

Made in the USA.

Product Details

Product Details