Product Details

Driven by the operational experience of Magpul Core™ instructors, the MS3 Multi-Mission Sling System was designed to give a versatile weapon-retention solution for a multitude of tactical environments and missions. As a standalone product, the rapidly-convertible MS3 allows an operator to leverage the maneuverability of one-point attachment for direct action, or two-point attachment for stability. Single-hand adjustments and quick-release, positive-locking hardware provide flexibility and durability in a truly adaptable sling system. Used in conjunction with the Magpul ASAP® plate (sold separately), the MS3 enables seamless transitions into an array of shooting positions without getting bound or fouled. The MS3 concept allows switching from Weapon Shoulder to Reaction Shoulder for shooting around corners, under vehicles, or to minimize exposure. The MS3 can also increase operator survivability by keeping the weapon in the fight in case of injury to the operator's shoulder, arm, or hand. The MS3 GEN 2 incorporates a new low profile quick-adjust Slider which minimizes bulk and allows for secure, yet effortless, sling adjustment. Webbing length has also been increased for a comfortable fit with all body types and armor configurations.

Made in U.S.A. and 100% Berry Amendment compliant.

Product Details

The MS1 Sling is the most versatile addition to the Magpul® line of rifle slings. This sling system starts as an optimized, dedicated two-point sling that serves equally well in a one-point role when using optional adapters. Built around our MS1 slider, this system provides rapid adjustments to either lengthen or shorten the sling with no slipping once set, and no tails, loops, or other potential snag hazards. In a two-point role, the MS1 allows easy shoulder transitions, rapid adjustability for hands free rifle carry and shooting support from various positions. The MS1 system also has a series of adapters that are sold separately and based on the MS3® and MS4™ slings. By adding the appropriate adapter (available with Paraclip™ or QD Sling Swivel) for the sling, you can easily add one-point functionality to your MS1.

In testing, the sling had to survive tens of thousands of cycles in wet, dry and sandy conditions, static load testing without slippage for 72 hours and weighted six foot dynamic drop tests. In addition to the controlled lab tests, we also swam it, jumped it, hunted with it, hiked into the mountains with it, and most importantly shot with it in a variety of rugged field conditions.

The MS1 Sling is made entirely in the USA, and is fully Berry Amendment compliant.

Product Details

Made from reinforced polymer and an anodized aluminum bedding block, the Magpul Remington 700 Hunter Stock offers users a cost effective replacement featuring fully adjustable length of pull, comb height, and enhanced ergonomics. 

Compatible with Remington 700 Short Actions, this stock requires no bedding and is a true “drop-in” solution for the end user*. This stock is also M-LOK compatible to accept a broad range of accessories.

Also available is our Bolt Action Magazine Well, which allows the rifle to be used with detachable box magazines without the need for custom inletting.

Made in U.S.A.

FEATURES

• Compatible with standard Remington 700 pattern short actions with stock Remington hinged floorplates*
• Easily upgradeable to removable AICS-spec magazines (5.56x45 or 7.62x51 pattern) with the affordable Magpul Bolt Action Magazine Well
• Reinforced polymer shell with Type III hard anodized, machine finished, A380 cast aluminum V-bedding block
• Tapered Beam design provides good rigidity through forend
• Free-floats ALL factory Remington barrels including aftermarket profiles up to a Medium Palma (0.920" dia. 5.50" forward of the breech)
• 60 degree grip angle from bore axis
• Adjustable LOP from 13.0”-15.0” with included 0.50” Spacers
• Rubber recoil butt-pad included and optional OEM Butt-Pad Adapter available for use with aftermarket pads
• Optional High Cheek Riser Kit with 0.50" and 0.75" Risers to adjust cheek weld (Stock comes pre-fitted with 0.25" Riser)
• Accepts factory and most aftermarket triggers
• M-LOK™ slots on forend sides and bottom for a wide variety of accessory and sling mounting options
• Three dimpled drill points to install optional standard swivel studs (#10-32 x 3/8” long dome stud)
• Push-button QD swivel compatibility in rear with optional Sling Mount Kits
• Left and Right rear 1-1/4” Footman’s Loops

The UBR GEN2 is an adjustable stock for AR15/M4 and AR10/SR25 platforms, designed to offer similar strength and stability as a fixed stock with a consistent and comfortable cheek weld in any position.

An update of the revolutionary Utility / Battle Rifle (UBR) stock, the UBR GEN2 features a fixed cheek piece to provide a consistent cheek weld in any of its eight positions, and is compatible with Carbine as well as A5 and SR-25 length buffer systems. Designed to accommodate large bore AR calibers and withstand severe impacts, the UBR GEN2 is nearly five ounces lighter while retaining all the durability its predecessor was legendary for. Comes standard with front and rear QD sling attachment points, two footman's loops, the ergonomic MOE SL™ angled-toe rubber butt-pad, and customizable storage compartment.

Made in the USA.

The MOE Fixed Carbine Stock - Commercial-Spec model (Magpul Original Equipment) provides an inexpensive, fixed, non-collapsing stock option for Commercial-Spec size carbine-length buffer tubes.

The MOE Fixed Carbine Stock has a slim profile, improved cheek weld, and multiple sling attachment options, and is compatible with ASAP® Plates and PRS® Extended Rubber Butt-Pad. Installation is non-armorer and does not require the castle nut or lock plate to be removed.

Made in the USA.

The MOE Fixed Carbine Stock - Mil-Spec model (Magpul Original Equipment) provides an inexpensive, fixed, non-collapsing stock option for Mil-Spec size carbine-length buffer tubes.

The MOE Fixed Carbine Stock has a slim profile, improved cheek weld, and multiple sling attachment options, and is compatible with ASAP® Plates and PRS® Extended Rubber Butt-Pad. Installation is non-armorer and does not require the castle nut or lock plate to be removed.

Made in the USA.

The Magpul STR (Storage/Type Restricted) Carbine Stock - Commercial-Specis a drop-in replacement buttstock for AR15/M4 carbines using Commercial-Spec sized receiver extension tubes. A storage-capable version of the CTR®, the STR has improved cheek weld and two water resistant battery tubes on a compact, reinforced polymer A-frame design.

A shielded operation lever and supplemental friction locking system prevent accidental operation and minimize excessive stock movement for enhanced weapon stability and accuracy.* The STR incorporates two integral sling loops, a reversible push-button QD sling mount, and a replaceable 0.30" rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.

Made in the USA.

The Magpul STR (Storage/Type Restricted) Carbine Stock - Mil-Spec is a drop-in replacement buttstock for AR15/M4 carbines using Mil-Spec sized receiver extension tubes. A storage-capable version of the CTR®, the STR has improved cheek weld and two water resistant battery tubes on a compact, reinforced polymer A-frame design.

A shielded operation lever and supplemental friction locking system prevent accidental operation and minimize excessive stock movement for enhanced weapon stability and accuracy.* The STR incorporates two integral sling loops, a reversible push-button QD sling mount, and a replaceable 0.30" thick rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.

Made in the USA.