• Compact & easy to install.
• Can be used with a two point sling set up or as a single point sling attachment.
• Provides a side Quick Detach 870 sling mount.
• With just a push of the QD button, unsling your shotgun for tactical flexibility.
• Equipped with the GG&G proprietary Heavy Duty Sling Swivel with Enhanced Tactile Finger Grooves..
• QD Sling Swivel accommodate up to 1 1/4” slings.
• Sling attachment includes Limited Rotation Sling Swivel feature to help eliminate sling wrap up.
• Manufactured from billet 6061 T-6  aluminum.
• All edges have been dehorned for shooters safety.
• Bead blasted and Type III hard anodized in matte black per mil-spec.

Feel free to ask all the question you have. We take the time to answer them all!

• Compact & easy to install.
• Ambidextrous
• Provides a side QD sling mount.
• With just a push of the QD button, unsling your shotgun for tactical flexibility.
• Equipped with the GG&G Proprietary Heavy Duty Sling Swivel with Enhanced Tactile Finger Grooves.
• QD Sling Swivels accommodate up to 1 1/4” slings.
• 870 Sling attachment includes Limited Rotation Sling Swivel feature to help eliminate sling wrap up.
• Manufactured from tough AS-35 Geneva steel.
• All edges have been dehorned for shooters safety.
• Bead blasted and manganese phosphate finished in matte black per mil-spec.

Feel free to ask all the question you have. We take the time to answer them all!

Basically the same as the SSA with 4.5 Weight.

The main differences with the SSA are a different way of holding the hammer pin in, different pins, no laser marking and only spot MP check. Visually, from the outside of the gun there is no difference from the SSA and the feel and reliability is the same.

Feel free to ask all the question you have. We take the time to answer them all!

The Phase 5™ (EBRv2/308)™ gives the operator the ability to reload quicker, clear jams in a more efficient way and eliminate unnecessary hand movements during various operations.

Monolithic tri-steel technology gives the (EBRv2/308)™ the ability to be lightweight and super strong. This EBRv2/308 was made for the DPMS™ type 308 rifles. This unit has gone through a stringent 9 stage manufacturing process; creating the product that is depended on and trusted by tactical trainers and law enforcement officers nationwide.

(EBRv2/308)™ has no obstructing backing plates or screws that fail, come loose or get in the way of some weapon systems.

COMPATIBLE WITH DPMS™ GEN. I, LR-308, & AR-308 TYPE PLATFORMS

(Not compatible with the Armalite AR-10, DPMS™ GII, or Sig 716)

ECS Stock

ECS Rail Covers

ECS Grips

* Classic A2 style

Adapts your Colt large pin lower to your standard small pin upper.

USA made

• • Mounted in forward angle increases rigidity of forearm, while providing more natural wrist angle when grabbing the vertical grip.
• • Mounted in reverse angle to increase control when grabbing handguard and vertical grip.
• • Flat sides give better yaw control to the shooter during firing and non-firing manipulations.
• • Aggressive texture and generous storage volume combined with modular design to allow improvements and adaptation in the future.
• • Cross bolt designed to work with improvised tools (such as a quarter) allow for easy adjustment or re-tightening.
• • Hinged trap door offering storage inside the grip with a water resistant rubber gasket.
• • Reversible clamps allow user to setup fasteners to reside on either side.
• • Spring-loaded clamp makes installation and removal easier.
• • Available in popular colors such as: Black, Flat Dark Earth (FDE) and Foliage Green.
• • Made in the USA and manufactured from high quality impact resistant polymers.

Feel free to ask all the question you have. We take the time to answer them all!

BCM GUNFIGHTER VERT GRIP SHORT

· Low-profile length for increased mobility and decreased “snag” factor.

· The forward angle increases the rigidity of the forearm, while providing a more natural wrist

angle.

· Can be mounted in reverse angle to increase control when grabbing handguard and grip

· Flat sides give better yaw control to the shooter during firing and non-firing manipulations.

· Aggressive texture and storage volume combined with modular design to allow improvements and

adaptation in the future.

· Cross bolt designed to work with improvised tools (such as a quarter) and allow for easy

adjustment or re-tightening.

· Reversible clamps allow user to set up fasteners to reside on either side.

· Spring-loaded clamps makes installation and removal easier.

· Made in the U.S.A., and manufactured from high quality, impact resistant polymers.

Feel free to ask all the question you have. We take the time to answer them all!

The BCMGUNFIGHTER™ KMSM

KeyMod™ Quick Detachable Sling Mount

• Low-Profile for increased mobility and decreased "snag" factor
  

• Fits standardized KeyMod™ interface mounting holes
  

• Fits standard push button, quick detach sling swivel (not included)

• 8-position (360°), non-rotational locking interface

• Requires three KeyMod™ attachment hole mounting points
  

• All steel construction

*Quick detach sling swivel not included*

Feel free to ask all the question you have. We take the time to answer them all!