The Sidewinder 2 is the next evolution of the wildly successful Sidewinder back-up iron sights. After receiving feedback from competition shooters and military personnel in the field, the sights have been upgraded to easily handle not only 5.56 but larger calibers as well as harsher environments. Keeping our same design concept, the Sidewinders offer the on the go option for 45 degree offset or traditional in line capabilities – all in one package. Tool-less adjustment dials allow easy sight adjustments Whether you need a low profile, low snag inline backup for your red dot, or a short range, offset CQB sight backup for magnified optics, the Sidewinder can fill your needs. The low-profile SI-Ambush mounting system can clear even the largest of optics and the offset sight means instant access to your back up iron sights without removing your optic. Who said you had to compromise?

Package includes:
- 1x Front Sidewinder Iron Sight
- 1x Rear Sidewinder Iron Sight
- 1x 2pcs screws
- 1x allen key
 

Features:
- SI-Ambush low profile mounting system.
- 45 degree offset and traditional inline capabilities in one unit.
- Tool-less dial adjustments for windage and elevation.
- Steel and Aircraft Aluminum construction.

Features
- Direct mountable to both M-Lok and Keymod.
- Lightweight, durable aluminum design
- Multiple ergonomic and functional grip options
- Billet 6061 aluminum
- Designed to offer barricade stop functionality

The Strike Industries LINK-CFG (Curved Fore Grip) design was derived from our Cobra Tactical Fore Grip and features SI’s LINK system which is mountable to both M-Lok and Keymod rails. The LINK-CFG is constructed of 6061T6 aluminum- making it ultra-durable for continued use. Using these grips, shooters can apply different techniques to adapt to various scenarios: At the front, a ridged face allows a shooter to brace the rifle without worrying about the grip moving around. At the rear of the grip, the curve can be used as a hand stop. The innovation in this grip will keep you happily stabilized throughout your shooting experience.

Package includes

1xLINK CFG
1x Screw and Nut set

Features
- Direct mountable to both M-Lok and Keymod.
- Lightweight, durable aluminum design
- Multiple ergonomic and functional grip options
- Billet 6061 aluminum
- Designed to offer barricade stop functionality

The cobra grip is made from advanced polymer which is very strong and will definitely take a beating. The shooter can use different grip techniques and allows the user to have a secure and comfortable grip in any situation or position. It features a ridged front face that allows you to brace the rifle against a table or a wall and because it is ridged, it will prevent any sliding during the recoil kick. Another unique feature is the Cobra “hood”. It acts like a heat shield that will prevent the heat from going to your hands and gives your lead hand an ergonomic platform to use. The rear portion of the Cobra Grip can function as a hand stop. One advantage that the SI Cobra Grip has over its competitors is the friction lock design. Material has been removed from the center so when tightening the Main Screw, it will allow it to grip the rail system and thus preventing any wobbling due to lose fitment or over use of the grip. The Strike industries Cobra grip is slim and low profile which makes it very light weight.

Form meets function with the Strike Industries line of Aluminum trigger guards.  Not only does the sculpted, billet aluminum trigger guard make your rifle stand out from the pack, it also provides real added value over the competition. The Fang feature from our popular polymer trigger guard is retained to help guide the magazine for faster, more consistent reloads. 

Contents:
- 1x Cobra Aluminum Trigger Guard
- 4x M3 Hex Screw
 

Features:
- Aircraft grade aluminum construction
- Magazine reload assist
- Cleaner, faster reloads
- Lightweight (.4 oz with included hardware)

Form meets function with the Strike Industries line of Aluminum trigger guards.  Not only does the sculpted, billet aluminum trigger guard make your rifle stand out from the pack, it also provides real added value over the competition.  The Cobra’s “hood” provides a hard index point off the trigger for safety, and a convenient rest that is optimally placed for rapid re-engagement.  The Fang feature from our popular polymer trigger guard is retained to help guide the magazine for faster, more consistent reloads.

Contents
- 1x Cobra Aluminum Trigger Guard
- 4x M3 hex screw w/ pre-applied Loctite® Threadlocker Blue 242®

Features:
- Aircraft grade aluminum construction
- Magazine reload assist
- Cleaner, faster reloads
- Functions as safe trigger finger index rest
- Lightweight

The new ARCH-EL Charging Handle from Strike Industries is a T-6 7075 forged hard anodized charging handle featuring a larger aluminum latch surface that functions with ease in adverse conditions. The SI ARCH-EL featuring the aluminum SI Extended Latch will not wear your receiver as fast as steel latches! With its high polished surface, its ergonomic design makes for a smooth, clean charge. The quality of the ARCH-EL is second to none and it’s built for durability. Once you place the ARCH-EL on your rifle, you will see, feel, and know the quality of the ARCH-EL!

 For those chasing the ultimate in lightweight builds, the Strike Industries Ultra Light take down and pivot pins is perfect for those looking for a cost effective, but durable solution.  We understand ounces add up to pounds, and now offer our popular EPTP design in one of the lightest solutions on the market.  The Ultra Light pivot and takedown pins are precision CNC machined from billet 7075 aluminum for durability.  Give up nothing but the weight with the SI Ultra Light Takedown and Pivot Pins.

Package include
- 1 x Extended Pivot pin
- 1 x Extended Take down pin

Features
- Extended Pivot Pin / Length: 1.31”
- Made for AR-15 style lowers
- Extended Takedown Pin / Length: 1.08”
- Weight: 0.20 oz net, 0.46oz gross 
- Ultra Light, ultra strong aircraft grade aluminum construction.
- Extended grasping surface
- Colorline anodized finish

Introducing the TRIBUS Enhanced Anti-Rotation Castle Nut & Extended End Plate. The TRIBUS is next iteration of the previous AR-ECN&EEP. New features include two addition QD mounting points added to the left & right side of the extended end plate. Totaling in 3 QD mounting points. The extended end plate's QD mounts are pushed back away from the webbing of the primary hand, allowing for better weapon manipulations in tight spaced and under stress without the startling pain that can result from a pinched hand when using a sling attached to a standard, flat QD end plate. Another big improvement is the added anti-rotation castle nut feature. Once installed, use the set screw to prevent the castle nut from backing out during weapon usage.

Features
- Lightweight at only 0.2oz
- Anodized Red, Blue and Grey Line color
- Increased corrosion resistance
- Antiroation Castle Nut
- 3 QD Mounting Points
- Extended End Plate for prevention of pinching hand when using a sling attached 
Staking not required, castle nut will not back out once screw is threaded.

Package includes:
1x Extended castle nut
1x Extended end plate
2x M3x12mm set screw
1x 1.5mm hex key

The SI Flip Switch is a lightweight, low profile ambidextrous safety.  Created to fill the gap between our basic but functional Hex Selector Switch and the larger go-fast Strike Switch, the Flip Switch features carefully designed ergonomics to facilitate positive, but comfortable engagement and disengagement even when wet despite its compact, low drag size. 

For those looking to upgrade the aesthetics of their AR, the Flip Switch is offered in our full anodized color line for that custom touch.

Package includes:
- 2x Shaft Screw
- 1x 60/90 Shaft
- 1x End Cap
- 1x Right Side Flip Switch
- 1x Left Side Flip Switch

Features
- Ambidexterous
- Ergonomic Shape
- Modular Assembly
- Strike 60/90 Option

The Forward Assist Plunger is made of lightweight aluminum for those looking to retain the functionality of a forward assist, while seeking weight savings wherever they can.  The forward assist pawl is constructed of tool steel to ensure positive engagement of the forward assist ratchets on compatible bolt carriers and maintain long service life. 

Package includes:
- 1x Forward Assist Plunger
- 1x Forward Assist Pawl (Installed)
- 1x Forward Assist Spring (Installed)
- 1x Forward Assist Spring Pin 

Features
- Lightweight at only 0.2oz
- Anodized Red, Blue and Grey Line color
- Increased corrosion resistance