Precision Firearms Billet Lower and Upper Matched Set  

These matched sets have absolutely no play. Comes with dust cover and forward assist.

Specs: 

• 7075 T6 Aluminum Billet
• Finished with mil-spec, hard-coat, black anodized
• Cerakote Colors available - Pictured is Black
• Caliber Marking is Multi
• Feel Free to email list of additional parts if you need them. We can change or add to orders as needed.

We are a FFL licensed manufacturer. This AR Lower can be sold to an individual – but will need to be transferred through your local FFL. Your FFL must contact us and we will ship to them. You must make the arrangements, but we will help the best we can; you must be able to pick-up and complete this transaction through your local FFL. Your local FFL will charge you for this transfer (rates are normally in the $25-$40 range). You must be able to pass the required background check. DO NOT purchase if you cannot agree to this! Payment is due before rifle ships. You are responsible to know the laws in your area! All Returns are subject to 20% fee.


Feel free to ask all the questions you have. We take the time to answer them all!

Precision Firearms Billet 308 SideCharge Matched Set

These matched sets have absolutely no play. Comes with PF SuperMatch (nickel boron) SideCharge Carrier. Also includes the SideCharge Knob Assembly and wrench.

Specs: 

• 7075 T6 Aluminum Billet
• Finished with mil-spec, hard-coat, black anodized
• Cerakote Colors available - Pictured is Black
• Caliber Marking is Multi
• DPMS Pattern
• Feel Free to email list of additional parts if you need them. We can change or add to orders as needed.

We are a FFL licensed manufacturer. This AR Lower can be sold to an individual – but will need to be transferred through your local FFL. Your FFL must contact us and we will ship to them. You must make the arrangements, but we will help the best we can; you must be able to pick-up and complete this transaction through your local FFL. Your local FFL will charge you for this transfer (rates are normally in the $25-$40 range). You must be able to pass the required background check. DO NOT purchase if you cannot agree to this! Payment is due before Lower ships. You are responsible to know the laws in your area! All Returns are subject to 20% fee.


Feel free to ask all the questions you have. We take the time to answer them all!

Precision Firearms Billet Lower and Upper Matched Set

These matched sets have absolutely no play. Comes with dust cover. Weight is 1lb 10oz.

Specs: 

• 7075 T6 Aluminum Billet
• Finished with mil-spec, hard-coat, black anodized
• Cerakote Colors available - Pictured is Black
• Caliber Marking is Multi
• DPMS Pattern
• Feel Free to email list of additional parts if you need them. We can change or add to orders as needed.

We are a FFL licensed manufacturer. This AR Lower can be sold to an individual – but will need to be transferred through your local FFL. Your FFL must contact us and we will ship to them. You must make the arrangements, but we will help the best we can; you must be able to pick-up and complete this transaction through your local FFL. Your local FFL will charge you for this transfer (rates are normally in the $25-$40 range). You must be able to pass the required background check. DO NOT purchase if you cannot agree to this! Payment is due before Lower ships. You are responsible to know the laws in your area! All Returns are subject to 20% fee.


Feel free to ask all the questions you have. We take the time to answer them all!

The AR10 /AR15 upper assembly block is used to hold the upper in place for assembly, cleaning, etc. The upper is held into place with two steel receiver pins. Machined from solid black anodized aluminum, this assembly block is durable and trustworthy.

Made in the U.S.A.

The best guard for big hands and for gloved shooting.

Especially in cold weather or tactical operations, you’ll need to upgrade for more room around the trigger. Our curved trigger guard is designed to accommodate gloved shooting, and even maintains the original swing-down feature for use with heavier winter gloves.

• Made of 6061 aluminum
• Milspec Type III anodized finish
• Drop-in upgrade
• Uses original roll pin

KISSAKE the point of the Katana. Fitting for our new compensator for our Katana Rifle series. Available in 416R polished stainless and matte black nitride. Single Point Threaded and machined within .001 center line of bore.

Calibers available

• 556/223
• 6mm
• 6.5 mm,
• .300/308
• 9mm
• 1/2x28
• 1/2x36
• 5/8x24

The PF NOX (Latin for night) is made by us for Match Rifles needing a Flash hider that does not affect accuracy. Available in Stainless, Bead Blast, or Phalanx (Black Nitride) coating.

Stainless - 1/2x28

Stainless - 1/2x36

Stainless - 5/8x24

Phalanx - 1/2x28

Phalanx - 1/2x36

Phalanx - 5/8x24

Precision Firearms LMD Brake

LMD- Level Muzzle Device for Normal Standard .740 Diameter Barrels. Typical AR Barrel.

Tapered Muzzle end is .725". Large Diameter is .990". Length is 2 inches.

This is our own in house machined Billet brake. Made from 416 Stainless. 11 Degree Target Crown.

Top ports are off center to help with countering barrel torque. Includes Shim kit.

Available in:

• For 223 Caliber - 1/2x28
• For 224 Valkyrie Caliber - 5/8x24
• For 6.5 Caliber - 5/8x24
• For 6.5 Caliber -9/16x24
• For 308 Caliber - 5/8x24
• Cerakoted Stainless + $15
• Phalanx (Black Nitride) +$10
• Bead Blasted +$5

Precision Firearms LMD Brake

LMD- Level Muzzle Device for Medium Heavy .875 Diameter Barrels. Typical AR Barrel.

Tapered Muzzle end is for barrels w/ muzzle diameter of .850" - .875"  Diameter is .875". Length is 2 inches.

This is our own in house machined Billet brake. Made from 416 Stainless. 11 Degree Target Crown.

Top ports are off center to help with countering barrel torque. Includes Shim kit.

Available in:

• For 223 Caliber - 1/2x28
• For 224 Valkyrie Caliber - 5/8x24
• For 6.5 Caliber - 5/8x24
• For 6.5 Caliber -9/16x24
• For 308 Caliber - 5/8x24
• Cerakoted Stainless + $15
• Phalanx (Black Nitride) +$10
• Bead Blasted +$5

Precision Firearms LMD Brake

LMD- Level Muzzle Device.

Large Diameter for "Bull" Barrels. Tapered Muzzle end is .925". Large Diameter is 1.100". Length is 2 inches.

This is our own in house machined Billet brake. Made from 416 Stainless. 11 Degree Target Crown.

Top ports are off center to help with countering barrel torque. Comes with Shim Kit.

Available in:

• For 223 Caliber - 1/2x28
• For 224 Valkyrie Caliber - 5/8x24
• For 6.5 Caliber - 5/8x24
• For 308 Caliber - 5/8x24
• Cerakoted Stainless + $15
• Phalanx (Black Nitride) +$10
• Bead Blasted +$5