Bravo Company Manufacturing M-LOK Rail Panels offer an aggressive, non-slip, anti-reflective surface, ventilated for cooling. These ultra-slim mlok rail covers have a rounded surface allowing a ‘round’ handguard feeling from an octagonal profile. Each strip is designed to fit all M-LOK mounting surfaces with 4 consecutive M-LOK slots, though each may be cut to any length.

Features:

• Contains 5 matching color M-LOK panel strips
• High-strength polymer material
• Install in either direction
• Length: 5.550”
• Width: 0.625”
• Thickness: 0.100”
• Made in the U.S.A.

• Rail section is made of Hard Anodized Aircraft Aluminum Alloy.
• Made to the Mil-Standard 1913 Picatinny Arsenal Specifications.
• Features a Snag resistant design, while retaining Mil-Standards.
• M-LOK Compatible.

Designed to complement modern shooting grips, the Kinesthetic Angled Grip (KAG) uses a biomechanically efficient forward rake to create an interface for positive retention and joint relief to the wrist, elbow, and shoulder, allowing for smooth weapon manipulation without substantial increase to the girth of the weapon system. Textured on both front and back, the profile of the KAG creates a channel for consistent and positive engagement which translates directly into improved efficiency in weapons manipulation and target to target transitions.

• Forward rake gives positive retention when using "C-clamp" (thumb over bore) method of handguard support
• Works as a rest for supported firing positions
• Slight angle without significant bulk adds just the right amount of relief to the wrist without substantially increasing the girth of the handguard
• Small profile is just enough to get repeatable hand position on weapon forend
• Textured in front and back for positive engagement
• Made in the U.S.A. from high quality, impact resistant polymers.

Designed to complement modern shooting grips, the Kinesthetic Angled Grip (KAG) uses a biomechanically efficient forward rake to create an interface for positive retention and joint relief to the wrist, elbow, and shoulder, allowing for smooth weapon manipulation without substantial increase to the girth of the weapon system. Textured on both front and back, the profile of the KAG creates a channel for consistent and positive engagement which translates directly into improved efficiency in weapons manipulation and target to target transitions.

 Forward rake gives positive retention when using 'C-clamp' (thumb over bore) method of handguard support

 Works as a rest for supported firing positions

 Slight angle without significant bulk adds just the right amount of relief to the wrist without substantially increasing the girth of the handguard

 Small profile is just enough to get repeatable hand position on weapon forend

 Innovative patent pending attachment method allows for robust clamping and alignment with minimal hardware and slender accessory size

 Textured in front and back for positive engagement

 Made in the U.S.A. from high quality, impact resistant polymers.

Designed to complement modern shooting grips, the Kinesthetic Angled Grip (KAG) uses a biomechanically efficient forward rake to create an interface for positive retention and joint relief to the wrist, elbow, and shoulder, allowing for smooth weapon manipulation without substantial increase to the girth of the weapon system. Textured on both front and back, the profile of the KAG creates a channel for consistent and positive engagement which translates directly into improved efficiency in weapons manipulation and target to target transitions.

• Forward rake gives positive retention when using C-clamp (thumb over bore) method of handguard support
• Works as a rest for supported firing positions
• Slight angle without significant bulk adds just the right amount of relief to the wrist without substantially increasing the girth of the handguard
• Small profile is just enough to get repeatable hand position on weapon for-end
• Innovative patent pending attachment method allows for robust clamping and alignment with minimal hardware and slender accessory size
• Textured in front and back for positive engagement
• Made in the U.S.A. from high quality, impact resistant polymers.

A Charging Handle for the 21^st Century Gun Fighter

• A NEW Charging Handle and Extended Latch System
• Charging Handle forged from 7075 T6 Aluminum
• Hard Coat Anodized per Mil-A-8625F, Type III, Class 2
• GFH - Mod 4B (medium latch)

Driven by over a decade of feedback from real-world combat operations, BCM® has made continual design refinements and structural improvements to the charging handle in the M4 and M16 to address the current manual of arms for the weapon system.

A Charging Handle for the 21^st Century Gun Fighter

• A NEW Charging Handle and Extended Latch System
• Charging Handle forged from 7075 T6 Aluminum
• Hard Coat Anodized per Mil-A-8625F, Type III, Class 2
• GFH - Mod 3B (large latch)

Driven by over a decade of feedback from real-world combat operations, BCM® has made continual design refinements and structural improvements to the charging handle in the M4 and M16 to address the current manual of arms for the weapon system.

• • Mounted in forward angle increases rigidity of forearm, while providing more natural wrist angle when grabbing the vertical grip.
• • Mounted in reverse angle to increase control when grabbing handguard and vertical grip.
• • Flat sides give better yaw control to the shooter during firing and non-firing manipulations.
• • Aggressive texture and generous storage volume combined with modular design to allow improvements and adaptation in the future.
• • Cross bolt designed to work with improvised tools (such as a quarter) allow for easy adjustment or re-tightening.
• • Hinged trap door offering storage inside the grip with a water resistant rubber gasket.
• • Reversible clamps allow user to setup fasteners to reside on either side.
• • Spring-loaded clamp makes installation and removal easier.
• • Available in popular colors such as: Black, Flat Dark Earth (FDE) and Foliage Green.
• • Made in the USA and manufactured from high quality impact resistant polymers.

Feel free to ask all the question you have. We take the time to answer them all!

BCM GUNFIGHTER VERT GRIP SHORT

· Low-profile length for increased mobility and decreased “snag” factor.

· The forward angle increases the rigidity of the forearm, while providing a more natural wrist

angle.

· Can be mounted in reverse angle to increase control when grabbing handguard and grip

· Flat sides give better yaw control to the shooter during firing and non-firing manipulations.

· Aggressive texture and storage volume combined with modular design to allow improvements and

adaptation in the future.

· Cross bolt designed to work with improvised tools (such as a quarter) and allow for easy

adjustment or re-tightening.

· Reversible clamps allow user to set up fasteners to reside on either side.

· Spring-loaded clamps makes installation and removal easier.

· Made in the U.S.A., and manufactured from high quality, impact resistant polymers.

Feel free to ask all the question you have. We take the time to answer them all!

The BCMGUNFIGHTER™ KMSM

KeyMod™ Quick Detachable Sling Mount

• Low-Profile for increased mobility and decreased "snag" factor
  

• Fits standardized KeyMod™ interface mounting holes
  

• Fits standard push button, quick detach sling swivel (not included)

• 8-position (360°), non-rotational locking interface

• Requires three KeyMod™ attachment hole mounting points
  

• All steel construction

*Quick detach sling swivel not included*

Feel free to ask all the question you have. We take the time to answer them all!