Samurai Forged Lower

Specs: 

• 7075 T6 Aluminum Forging
• Finished with mil-spec, hard-coat, black anodized
• Cerakote Colors available
• Optional Matched Sets are available.
  
• Caliber Marking is Multi
• Feel Free to email list of additional parts if you need them. We can change or add to orders as needed.

We are a FFL licensed manufacturer. This AR Lower can be sold to an individual – But will need to be transferred through your local FFL. Your FFL must contact us and we will ship to them. You must make the arraignments, but we will help the best we can. You must be able to pick-up and complete transaction through your local FFL. Your local FFL will charge you for this transfer (rate are normally in the $25-$40 range). You must be able to pass the required background check. DO NOT purchase if you cannot agree to this! Payment is due before rifle ships. You are responsible to know the laws in your area! All Returns are subject to 20% fee.


Feel free to ask all the question you have. We take the time to answer them all!

Samurai Branded made in house micro length Barrels. 5 inch to 7 inch.

• Calibers Available 223 Wylde, 6.5 Grendel, 300 AAC
• Chambered in house by Samurai Firearms
  
• Twist Rate for 223 Wylde is 1-7 and 6.5 Grendel is 1-8, 300 AAC is 1-7
  
• Stainless 416R
  
• Threaded Muzzle
  
• Available in 5.0, 5.5, 6.0, 6.5, 7.0 inch lengths
• 5.0 to 6.5 are micro gas, get tube in options
• 7.0 7.5 are pistol gas, gas tube available in options
  
• Gas block is .750 diameter
• Bolts or Carrier Groups are Optional
• 6.5 Grendel Bolts must be .136 Bolts or known as Type 2
  
• Test Fired
  
• All muzzles are threaded. 1/2x28 for 223 and 5/8x24 for 6.5 Grendel and 300 AAC 
  

Options:

• Cerakote in either black or Stainless
• Bead Blast
• Bolts or Carrier Groups
• Nitride - adds 2- 4 weeks

Delivery time - 8-10 weeks

Fluting adds 1-2 Weeks.

Samurai Billet Lower

Specs: 

• 7075 T6 Aluminum Billet
• Finished with mil-spec, hard-coat, black anodized, Black Cerakoted for extra Protection
  
• Cerakote Colors available
• Optional Matched Sets are available.
  
• Caliber Marking is Multi
  
• Removable trigger guard
• Tension Screw
• 60 Degree Flared Magwell
• Feel Free to email list of additional parts if you need them. We can change or add to orders as needed.

We are a FFL licensed manufacturer. This AR Lower can be sold to an individual – But will need to be transferred through your local FFL. Your FFL must contact us and we will ship to them. You must make the arraignments, but we will help the best we can. You must be able to pick-up and complete transaction through your local FFL. Your local FFL will charge you for this transfer (rate are normally in the $25-$40 range). You must be able to pass the required background check. DO NOT purchase if you cannot agree to this! Payment is due before rifle ships. You are responsible to know the laws in your area! All Returns are subject to 20% fee.


Feel free to ask all the question you have. We take the time to answer them all!

Samurai Forged Lower and Upper Matched Set

These Matched Sets have absolutely no play. Comes with Dust Cover and Forward Assist.

Specs: 

• 7075 T6 Aluminum Forging
• Finished with mil-spec, hard-coat, black anodized
• Cerakote Colors available - Pictured is Black and Tungsten Gray
  
• Caliber Marking is Multi
• Feel Free to email list of additional parts if you need them. We can change or add to orders as needed.

We are a FFL licensed manufacturer. This AR Lower can be sold to an individual – But will need to be transferred through your local FFL. Your FFL must contact us and we will ship to them. You must make the arrangements, but we will help the best we can. You must be able to pick-up and complete transaction through your local FFL. Your local FFL will charge you for this transfer (rates are normally in the $25-$40 range). You must be able to pass the required background check. DO NOT purchase if you cannot agree to this! Payment is due before rifle ships. You are responsible to know the laws in your area! All Returns are subject to 20% fee.


Feel free to ask all the questions you have. We take the time to answer them all!

Samurai Firearms builds rifles, pistols, and parts utilizing the latest in computerized manufacturing. By keeping manufacturing in house, we can offer quality, American-made products at an affordable price, backed by a limited lifetime warranty.

This AR-15 Stripped Upper Receiver is built to MIL-SPEC. Crafted from a 7075-T6 aluminum forging and machined with M4 feed ramps. This stripped model does not include a forward assist or ejection port cover.

NOTE: Forward assist and ejection port cover sold separately.

Features:

• 7075-T6 aluminum
• M4 feed ramps
• MIL-SPEC Type III hardcoat anodized black
• Picatinny rail

Feel free to ask all the question you have. We take the time to answer them all!

Samurai Handguards for DPMS Pattern Large Frame Receivers

Samurai Firearms is proud to introduce our own Handguards. Made from high Strength Aluminum Alloy and Machined to Exacting Tolerances this Hand Guards is very strong and Light. Barrel nut is non timing and is very easy to install.

Specs:

• High Strength Aluminum Alloy
  
• Type 3 Hardcoat Anodizing
• Non Timing Barrel Nut
• M-LOK Compatible
• 15 inches and 18 inches Available
• Propietary Mounting system prevents rotation or slipoff
• Steel into Steel Hardware - No strippage
• 15 inch - Weight with Mounting Hardware: 16.4 ounces
• 18 inch - Weight with Mounting Hardware: 19 ounces
  
• Lifetime Warranty

Feel free to ask all the questions you have. We take the time to answer them all!

Samurai Hand Guards Standard Series

Samurai Firearms is proud to introduce our own Hand Guards. Made from high Strength Aluminum Alloy and Machined to Exacting Tolerances this Hand Guards is very strong and Light. 15 inch version only weighs 11.1 oz with Barrel Nut. Barrel nut is non timing and is very easy to install.

Specs:

• High Strength Aluminum Alloy
  
• Type 3 Hardcoat Anodizing
• Non Timing Barrel Nut
• M-LOK Compatible
• 7 inches to 15 inches Available
• Propietary Mounting system prevents rotation or slipoff
• Steel into Steel Hardware - No strippage
• 13 inch 10.1 Oz
• 15 inch 11.1 Oz
• Lifetime Warranty

Feel free to ask all the questions you have. We take the time to answer them all!

Samurai Hand Guards Standard Series

Samurai Firearms is proud to introduce our own Hand Guards. Made from high Strength Aluminum Alloy and Machined to Exacting Tolerances this Hand Guards is very strong and Light. 15 inch version only weighs 11.1 oz with Barrel Nut. Barrel nut is non timing and is very easy to install.

Specs:

• High Strength Aluminum Alloy
  
• Type 3 Hardcoat Anodizing
• Non Timing Barrel Nut
• M-LOK Compatible
• 7 inches to 15 inches Available
• Propietary Mounting system prevents rotation or slipoff
• Steel into Steel Hardware - No strippage
• 13 inch 10.1 Oz
• 15 inch 11.1 Oz
• Lifetime Warranty

Feel free to ask all the questions you have. We take the time to answer them all!

Samurai Hand Guards Mod 1

Precision Firearms with our Sister Company Samurai Firearms is proud to introduce our own Hand Guards. Made from high Strength Aluminum Alloy and Machined to Exacting Tolerances this Hand Guards is very strong and Light. 15 inch version only weighs 11.1 oz with Barrel Nut. Barrel nut is non timing and is very easy to install.

Specs:

• High Strength Aluminum Alloy
  
• Type 3 Hardcoat Anodizing
• Non Timing Barrel Nut
• M-LOK Compatible
• 4 inches to 20 inches Available
• Propietary Mounting system prevents rotation or slipoff
• Steel into Steel Hardware - No strippage
• 13 inch 10.1 Oz
• 15 inch 11.1 Oz
• Lifetime Warranty

9, 10, 11, 12, 13, 15, 18 inch are in stock! All other sizes shipping by Mid June

Feel free to ask all the questions you have. We take the time to answer them all!

Samurai Hand Guard Handguard Match Rifle Handguard MRH Mod 1

Available in 12, 13, 14, 15, 16, 18, 20 inches

After 19 years of using other brands of hand guards and always wishing for something a bit better we are not offering our own version of match rifle rail utilizing the Arca Swiss bottom rail for bipod and tripod mounting. Also works well for bags and sleds. M-lok on bottom and sides for those accessories. Machined from 6061 Alumnum with oversized mounting hardware. 2 inch Receiver Interface nut make a rock solid mounting system with no flex. Mounting screws are #10 versus the most others are #6 or #8 adding to the robustness of our design.

Available for preorder at special discounted pricing in 15, 18, and 20 inches. Other lengths will be added later.

Shipping Late 2023 in time for Christmas!

Only 100 Units will be available for resale pricing so first come first to get served.

Regular pricing after October will be $250-$275

Feel free to ask all the questions you have. We take the time to answer them all!