Product Description

The GLx mounts redefine what can be accomplished when the latest technology is applied to meet the shooting challenges faced in real world situations. Designed and manufactured right here in America with the perfect balance between strength, durability, and weight, GLx mounts will impress even the harshest critics.

The GLx 30mm Cantilever Scope Mount has arrived! Precision machined right here in the USA from lightweight 6061-T6 aluminum, this GLx mount has been optimized for use on the AR platform. This 20 MOA canted model helps extend the adjustment range of your scope to make reaching out to extended ranges easier than ever. The cantilevered design pushes your optics forward over 2" to ensure you get the perfect eye relief with your favorite scope. The skeletonized 4-screw cap rings reduce weight without sacrificing strength to keep your scope exactly where you want it. With the solid steel 1/2" Tactical Thumbscrews to clamp to the top rail and integral recoil lugs, even the heaviest recoil is no match. Backed by a lifetime warranty, the GLx 30mm Cantilever Scope Mount is the perfect fit for your new scopes.

Product Specifications

• Manufacturer: Primary Arms
• Manufacturer Part #: 910081
• Model: GLx
• Type: Mount
• Finish/Color: Black
• Description:  30MM Scope Mount

The Primary Arms Deluxe AR-15 Scope Mount is ideal for M4, AR-15, and similar “flat-top” 1913 Picatinny mounting platforms. Aluminum construction, durable matte black anodized finish. 2.52 inches of clearance between the rings. Places the center of your 30mm tube scope 1.5 inches above the rail. Fits scopes with 30mm tubes. This tough mount features a lifetime warranty.

To make sure that the mount nut is fully tightened, turn the nut clockwise until resistance is encountered. After that, turn another 1/2 turn. If a torque wrench is being used, we recommend no more than 35-40 in-lbs.

Bring the power of AutoLive to your favorite optics! The AutoLive Battery Cap is compatible with many of the industry’s most popular optics and brands, allowing you to improve their performance with motion-sensing illumination control. If your current optic has short battery life, or if you want ‘always-on’ storage for home defense, the AutoLive Battery Cap is the perfect upgrade for you.

• Integrated AutoLive motion sensing technology
• Instantly turns on optic illumination when you pick up your firearm
• Low profile design
• Extends battery life

Compatibility:

• Primary Arms SLx 1-8×24 FFP & SFP
• Primary Arms SLx 1-10×28 SFP
• Primary Arms SLx 1-6×24 SFP Gen III and IV
• Primary Arms SLx 1-6×24 FFP
• Sig Optics Tango6® MSR 1-6x24mm
• Vortex Strike Eagle® 1-6 SFP
• Vortex Strike Eagle® 1-8 SFP

The MBUS Pro (Magpul® Back-Up Sight) is a corrosion resistant all-steel back-up sighting solution that delivers maximum functionality and strength with minimum bulk at a price that's even smaller than its size. The dual aperture, windage adjustable Rear and no-tool, elevation adjustable Front excel in all 1913 Picatinny rail mounting applications, including rail-height gas blocks.

Positive detents keep the MBUS PRO Front and Rear at standard AR sight height when deployed, and so low when they are stowed that you'll never notice them until they're needed. Narrow width Front is compatible with most IR aiming laser and light installations for the professional user.

Made in U.S.A.

The MBUS Pro (Magpul® Back-Up Sight) is a corrosion resistant all-steel back-up sighting solution that delivers maximum functionality and strength with minimum bulk at a price that's even smaller than its size. The dual aperture, windage adjustable Rear and no-tool, elevation adjustable Front excel in all 1913 Picatinny rail mounting applications, including rail-height gas blocks.

Positive detents keep the MBUS PRO Front and Rear at standard AR sight height when deployed, and so low when they are stowed that you'll never notice them until they're needed. Narrow width Front is compatible with most IR aiming laser and light installations for the professional user.

Made in U.S.A.

The HS510C is an open reflex optical sight designed for rifle and carbine applications. Features include Holosun’s Super LED with up to 50k hours battery life, Multi-Reticle System, Solar Failsafe, and Shake Awake.

 The HS503CU Circle Dot is a compact red dot sight offering a 2 MOA dot or a 2 MOA dot with a 65 MOA circle reticle pattern. Employing new LED technology, the life time for one CR2032 battery can reach two years if left on constantly. However, the solar technology and automatic brightness features work together to extend the battery life dramatically beyond that for the average shooter. Featuring a housing design that shrouds the windage and elevation turrets on two sides. Perfect for shotguns, pistols, rifles, air rifles, and crossbows.

Features:

• 2 MOA dot and 65 MOA Circle
• Reduced training time and ammunition
• Unlimited field of view
• Parallax-free with unlimited eye relief
• Durable and reliable construction
• Low mount and 1/3 co-witness mount included

The Holosun HS515CM-GR Micro Dot Sight is packed full of features that make it one of the best values on the market. It comes the Multiple Reticle System (M.R.S.) that allows you to swap between two reticles depending on your preference. Either a single 2 MOA green dot or a 2 MOA green dot with a 65 MOA circle. It features a top mounted solar panel that keeps your optic charged so that it can run without the battery even in low light conditions. Additionally, the single CR2032 battery acts as a back up that lasts up to 5 years on the single dot and 2 years on the circle dot. This model also features protective shrouds around the elevation and windage adjustment knobs. With the innovative shake awake technology, the reticle will turn off when sitting still and immediately turn on at the slightest motion, ready to go. Improve the capabilities or your AR, AK, or any other weapon system with the Holosun HS515C-GR Green Dot Sight.

Features:

• Green reticle
• Shake Awake technology
• Solar Failsafe technology
• Multiple Reticle System
• 2 MOA dot with 65 MOA circle
• Up to 50,000 hours of operation on one CR2032 battery
• Parallax free with unlimited eye relief
• 10 brightness settings with 2 night vision compatible
• Housing constructed from 7075-T6 aluminum
• IPX8 water resistant rating
• Multicoated lenses
• .5 MOA adjustments
• 20mm lens
• Includes flip up covers, Kill Flash, and QD mount
• Weight: 4.06 oz.

This green dot sight is CNC machined from 7075-T6 aluminum to reduce the weight substantially while still being strong. The matte black anodized finish further adds protection against corrosion and scratching and prevents light from reflecting off the optic body. The lenses are fully multicoated to allow for optimal light transmission, an extremely clear sight picture, and reduced glare. This optic is parallax free with an unlimited eye relief for fast target acquisition and is optimal with both eye open shooting techniques. Included is a two-piece QD mount, clear flip up lens covers, and a Kill Flash.

Holosun Technologies is committed to creating innovative optic, laser/IR technologies for a broad range of shooting, hunting, law enforcement, and military needs. Using quality manufacturing standards, they provide military grade optics without the military grade price.

• Ergonomic design
• Aimpoint T-1 Mount and H-1 Mount provide a solid bolt on squeeze rail mounting system with a single recessed side bar and recessed socket head cap screw. 
• The Aimpoint Mount includes a custom prepared lens cover for the objective lens and an integral lens cover for the ocular end of the scope.
• The Aimpoint T-1/H-1 scopes easily install onto the T-1 Mount and the H-1 Mount with four 3mm screws. The installation wrench is included.
• Designed to mount directly to the AR-15/M16 upper receiver’s dovetail. This location places the red dot just above the front sight post.
• The Aimpoint T-1 Mount is low enough to allow co-witnessing with sights like the GG&G A2 BUIS and MAD BUIS.
• The T-1/H-1 Mount With Lens Covers is manufactured from solid billet 6061 T-6 aluminum.
• All aluminum parts are Type III hard coat anodized matte black per mil-spec.

The Special Purpose Rifle (SPR) has gained in popularity with shooters in the civilian and law enforcement community. Our technical advisors advised us that the scope most often used on SPR rifles is a 30mm low powered variable optic placed forward on the AR-15/M16 flattop receiver. To meet the specific optic mounting needs of the SPR shooters, we have introduced our new FLT Scope Mount With 30mm Integral Rings.

To provide flexibility to the end user, we are offering the FLT Scope Mount in two configurations; one is the Accucam QD model for those shooters requiring the ability to quickly remove or install their scope with 1/2 MOA repeatability, and the other is a semi-permanent bolt on installation, using a standard squeeze rail configuration side bar and 1/2" hex nuts. Both offer forward scope mounting. For comparative purposes the SPR Scope Mount places the scope forward 1.5 inches more than the GG&G AC-30 Scope Mount. The FLT Mount is lightweight weighing in at only 5.5 ounces, and is 5 inches long. It is low profile allowing excellent cheek weld when mounted to the AR-15/M16 flattop upper receiver. The height from the centerline of the 30mm integral rings to the top of the dovetail mounting platform is 1.460 inches. The center to center dimension of the rings is 3.750 inches. Both models are manufactured from 6061 T6 aluminum and Type III hard anodized matte black to mil-spec.

The FLT Accucam Quick Detach Scope Mount provides you with a solid method to quickly install or remove the scope from the weapon. The scope can quickly be installed on a dovetail rail in seconds by rotating the Accucam Lever to the locked position and can just as quickly be removed by rotating the Accucam Cam Lever to the unlocked position. Unlike other QD lever systems, it is fully adjustable to fit Weaver and MIL-STD-1913 dovetails, even those that are worn or out-of-spec. The ergonomic finger loop of the lever is easily operated, even with a gloved hand, and the round design is virtually snag proof. The Accucam mechanism is manufactured from solid billet 4140 steel. The QD FLT is not recommended for .50BMG or lightweight machine guns.