|
|
|
|
Magpul MBUS Sight Set
|
Magpul MBUS Sights Set
|
The new MBUS (Magpul Back-Up Sight) GEN 2 is a low-cost, color injection molded, folding back-up sight.
The MBUS Front Sight is adjustable for elevation and fits most 1913 Picatinny-railed hand guards, but is specifically tailored to the AR15/M16 platform.
Made in U.S.A.
Listing front, rear, or set. In all Magpul Colors
|
Regular Price |
$90.00
|
|
|
|
|
|
|
|
MAG993
|
PMAG D-50 LR/SR GEN M3
|
Product Details
The Magpul PMAG D-50 is a rugged, lightweight, and reliable 50-round polymer drum magazine designed for 7.62x51 NATO/.308 Winchester ammunition for SR25/M110 pattern rifles. It’s capable of using longer-than-SAAMI-spec match ammunition, up to 2.830” OAL, such as M118LR. Engineered to the same exacting standards as the famous Magpul PMAG and PMAG D-60® drum magazines, the D-50 continues the PMAG tradition of high-capacity performance and dependability. In addition, the D-50 brings GEN M3 features, which means enhanced strength, durability, and reliability.
The Magpul PMAG D-50 shares its DNA with the legendary Magpul PMAG GEN M3, which includes next-generation impact and crush-resistant polymer construction and the ability to seat fully loaded on a closed bolt. Robust stainless-steel internals withstand corrosion and long-term storage while loaded with no loss of function, spring fatigue, or reliability concerns. A slip-on semi-rigid dust cover prevents grit and debris intrusion during storage and transport.
Ease of use is at the forefront of the D-50 design. A ratcheting loading lever removes spring tension, making the D-50 easily loadable by hand. An anti-glare translucent window on the rear of the drum makes for quick positive visual indication of remaining ammunition. Additionally, the D-50 can be disassembled quickly with a simple flat blade screwdriver, and a has a dot matrix pattern that allows for easy marking and identification.
|
Regular Price |
$145.00
|
|
|
|
|
|
|
|
MAG980
|
Magpul BAD Lever
|
Description
Developed from the operational experience of the Magpul DynamicsSM team, the B.A.D. Lever (Battery Assist Device) is designed to considerably improve the speed and efficiency of the AR15/M16 bolt catch. The B.A.D. Lever quickly addresses reloading and malfunction clearance shortcomings of AR15/M16 platforms by extending a paddle to the right side of the weapon, allowing manipulation of the bolt stop from the fire control/ready position with the right-hand trigger finger.
Made from milspec-anodized aluminum, the B.A.D. Lever attaches to the standard AR15/M16 bolt release without permanent modification to the weapon. Functional for both left and right-handed shooters, the B.A.D. Lever also allows traditional bolt catch manipulation according to the AR15/M16 manual of arms. All mounting hardware included.
Made in U.S.A.
Feel free to ask all the question you have. We take the time to answer them all!
|
Regular Price |
$28.00
|
|
|
|
|
|
|
|
MAG950
|
Magpul GL Enhanced Magwell G19 Gen4
|
The Magpul GL Enhanced Magazine Well for GLOCK 19 GEN 4 is a high performance, purpose-built Glock frame magazine well. It was designed to enhance and ensure positive magazine insertion in high stress scenarios. Its sleek and ergonomic design features also provide excellent concealment and ensureg minimal printing to the user's clothing. Ramp and edge geometry allow for the smooth removal of faulty or stuck magazines during reloading or immediate action events.
The Magpul GL Enhanced Magazine Well is optimized for use with standard capacity Glock factory magazines, Magpul GL magazines, and a variety of aftermarket floorplates and extensions that are available for both. Recent generations of reduced capacity (10 rd) factory Glock magazines have several dimensional differences which may interfere with any magazine well, including the Magpul GL Enhanced Magazine Well. Some large aftermarket floorplates may also interfere.
The Magpul GL Enhanced Magazine Well for Glock 17 Gen 4 and Glock 19 Gen 4 are not compatible as delivered out of the box with optional factory Glock Modular Back Straps. While end user modification is minor and may be attempted, it is taken at the user's risk.
Due to inherent variances in Glock frame production, if an excessively tight fit is experienced during the installation of an Enhanced Magazine Well that requires excessive force it is recommended that a professional gunsmith be utilized to complete the installation to mitigate the potential for frame damage.
Made in the USA.
|
Regular Price |
$24.00
|
|
|
|
|
|
|
|
MAG941
|
Magpul Bipod for 1913 Picatinny Rail
|
The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Our lightweight Mil-Spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. Its low-profile design conceals its internal mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between user configurations.
In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Its aluminum and stainless steel components, along with its injection-molded reinforced polymer, ensure years of dependable performance and reliability, all while shaving weight. It's extremely light weight, at just over 11 oz.
Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”. An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs. It also has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. Anodized surfaces and tight, precision tolerances mitigate squeaks and rattles.
A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style.
The Magpul Bipod is available in BLK or FDE colors.
Made in the U.S.A.
|
Regular Price |
$104.00
|
|
|
|
|
|
|
|
MAG939
|
Magpul MS1 QDM Sling
|
The Magpul® MS1 QDM Sling further enhances one of the most versatile line of rifle slings by including factory-installed Magpul QDM quick-disconnect swivels. As a heavy-duty replacement for the typical pushbutton swivel, the Magpul QDM offers an innovative low-profile design, singlehanded manipulation, a superior corrosion-resistant Melonite® finish, and a high-strength, freely rotating bale that canalizes sling webbing to prevent rollover. This sling system not only provides the strength, speed and security of Magpul QDM hardware, but is also optimized for dedicated two-point sling functionality built around the streamlined MS1 Slider.
Once set, this system allows for rapid adjustments to either lengthen or shorten the sling without slippage, tails, loops or other potential snag hazards. In a two-point role, the MS1 allows seamless shoulder transitions, fast adjustability for hands-free rifle carry and shooting support from various positions. The Magpul MS1 QDM Sling retains all of the original MS1 functionality and is fully adaptable for one-point applications with a series of adapters (sold separately) based on the MS3® and MS4® Slings.
In testing, the MS1 Sling survived tens of thousands of cycles in wet, dry and sandy conditions, static-load testing without slippage for 72 hours, and weighted six-foot dynamic drop tests. In addition to the controlled lab tests, we also swam with it, jumped with it, hunted with it, hiked into the mountains with it, and—most importantly—shot with it in a variety of rugged field conditions.
The Magpul MS1 QDM Sling is made in the USA and is fully Berry Amendment compliant.
|
Regular Price |
$74.00
|
|
|
|
|
|
|
|
MAG933
|
Magpul Bipod for MLOK
|
The Magpul Bipod for M-LOK offers serious strength and versatility at a price that provides unmatched value. Our lightweight Mil-Spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. Its low-profile design conceals its internal mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between user configurations.
In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Its aluminum and stainless steel components, along with its injection-molded reinforced polymer, ensure years of dependable performance and reliability, all while shaving weight. It's extremely light weight, at just over 11 oz.
Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”. An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs. It also has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. Anodized surfaces and tight, precision tolerances mitigate squeaks and rattles.
A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style.
The Magpul Bipod is available in BLK or FDE colors.
Made in the U.S.A.
|
Regular Price |
$104.00
|
|
|
|
|
|
|
|
MAG907
|
PMAG 10 GL9, 9x19 – GLOCK G19
|
The Magpul PMAG 10 GL9, 9x19 - GLOCK 19 was designed for flawless reliability and durability over thousands of rounds. It provides the same quality and performance of the proven Magpul PMAG series of Glock magazines, while also providing a viable product solution to those in locations and situations where a 10-round capacity restriction is required or desired. It utilizes the same double stack feed geometry as the standard capacity PMAG GL9 to ensure feeding and to avoid known reliability issues seen in many competitor products on the market.
Includes a high visibility controlled-tilt follower, a stainless steel spring, an easily removable floorplate for cleaning, paint pen dot matrix for magazine marking, ridged floorplate edges for better grip, and 10-round indicator windows. The magazine drops free when loaded or unloaded. All with the same boring reliability you expect from an OEM magazine.
The PMAG 10 GL9 is compatible with all compact 9mm Glock handguns, as well as sub-compact variants with some protrusion below the grip.
Made in the U.S.A.
|
Regular Price |
$13.00
|
|
|
|
|
|
|
|
MAG808
|
Magpul X-22 Backpacker Stock – Ruger 10/22 Takedown
|
The Magpul X-22 Backpacker stock takes the function of our full-sized Hunter X-22 Takedown and pares it down for ease of storage and transportation. Made for the Ruger 10/22 Takedown rifle, the X-22 Backpacker offers a minimalist solution for the hunter or outdoorsman who wants to transport their rifle in an efficient, convenient package without compromising shooting performance.
Constructed of durable advanced polymer, the X-22 Backpacker features an ergonomic hand guard, optional QD sling mounting capability, integrated storage compartment in the grip, a hinged storage compartment in the stock capable of storing up to three spare 10-round magazines, an MOE SL non-slip rubber butt pad, and a unique locking interface to attach the barrel assembly to the receiver when being transported.
Fits all Ruger 10/22 Takedown rifles as well as the Tactical Solutions SBX barrel.
Made in the USA.
|
Regular Price |
$109.00
|
|
|
|
|
|
|
|
MAG802
|
Magpul Pro 700, Folding Stock
|
The Magpul Pro 700 rifle chassis is an uncompromising, full-featured precision rifle chassis for short action Remington® 700 actions and other Remington® 700 footprint actions. The Pro 700 combines innovative engineering, precision machining, Mil-Spec quality finishes, and an extensive list of purposeful design features with complete adjustability to provide demanding end users with the most comprehensive available precision rifle platform solution for true out of the box performance.
Based on a full billet aluminum skeleton and clad in Magpul polymer for environmental comfort, noise mitigation, and ergonomics, the Pro 700 is also fully ambidextrous. Capable of fitting both right and left-handed actions with the simple swap of a bolt retainer plate, and with a reversible cheek riser and reversible hinge on the folding version, "lefties" haven't been "left out."
Made in the USA.
|
Regular Price |
$999.00
|
|
|
|