SuperNova IV

This is part of the "cadillac" upper series we call the SuperNova. 16 inch PF Diamond Fluted Barrel chambered in 5.56 NATO 1-7 or 1-9 Twist! Hand Guard is a Daniel Defense Lite Rail FSP 9.5 Inch. PF Billet 7075-T6 upper receiver with M4 Feedramps, Forward Assist, Shell Deflector, and Port Cover. We double check head-space and test fire after assembly. Choose 1-7 for 62-77 grain and 1-9 for 40-69 grain. Our PF Diamond Fluted Barrels are Phalanx Coated with a RC of 70+. These barrels are capable of  1 inch MOA and 15,000+ Rounds. DOES include BCM/Vltor Gunfighter charging handle.

Absolutely no modifications required to lower. Will mate to any quality Mil-spec lower except some Colts with the Large diameter take-down pins. We do stock the adapter pins for these Colts.

PF Billet Receiver: 7075, T6 aluminum, flattop rail, M4 Feedramped. Finished with mil-spec, hard-coat Type III, black anodizing for protection from scratches, mars, and abrasion.

Adams Arms Gas piston system. We have tested several other gas piston systems and have settled on the Adams Arms for dependability and ease of cleaning. Has positions for full piston charge, reduced piston charge for suppressors and no piston charge for single shot firing. "Mellonite" Coated Carrier is single piece with Integral Action Rod Lug. The Daniel Defense Free Float Lite Rail extends under the gas piston block for a truly custom look and feel. Comes with three rail covers to protect your hands. This is one sweet silky smooth upper assembly! It is truly impressive.

One piece bolt carrier is made out of high grade stainless steel and treated with a proprietary meloniting process that gives it the same, if not better, hardness level and corrosion resistance of hard chrome. We've also designed them with "skis" on the back to eliminate any wear you may experience (not expected) on the extension tube.

We are a FFL licensed manufacturer, but this upper can be shipped to an individual – no need to transfer through FFL. You are responsible to know the laws in your area!

• Billet Flattop upper with Forward Assist and Port Cover
• PF Diamond Barrel with Phalanx Coating 1-7 or 1-9 twist
• Dynacomp (as pictured) or YHMl Phantom Flashhider or YHM Phantom Brake
• Adam Piston System
• Daniel Defense 9.5 inch Lite-rail Free Float Forearm with Ladder Covers
• Gunfighter Charging Handle Mod 4 or Mod 3
• Optional Sling Mount
• Optional Bipod Mount
• Optional Quick Detach Bipod Mount

Feel free to ask all the question you have. We take the time to answer them all!

Lead times are approximately 16 weeks. If you need sooner, email and check current timeframes.

This is our custom built AR-15 M4 Flat top Upper Assembly with Adams Arms Gas Piston. This is part of the "cadillac" upper series we call the SuperNova. 20 inch Criterion Stainless Steel Barrel chambered in .223 Wylde 1-8 Twist! Hand Guard is a Daniel Defense DDM4 12 Inch Rifle Length Rail. Mil-spec upper receiver with M4 Feedramps and Lasered T-Markings. We double check head-space and test fire after assembly. This barrel will stabilize all .223 or 5.56 bullets up to 77 grain. Barrels are capable of under 1 inch MOA. DOES include BCM/Vltor Gunfighter charging handle.

Absolutely no modifications required to lower. Will mate to any quality Mil-spec lower except some Colts with the Large diameter take-down pins. We do stock the adapter pins for these Colts.

Mil spec Receiver: 7075, T6 aluminum, flattop rail, M4 Feedramped, Laser T Marked.  Finished with mil-spec, hard-coat, black anodizing for protection from scratches, mars, and abrasion.

Adams Arms Gas piston system. We have tested several other gas piston systems and have settled on the Adams Arms for dependability and ease of cleaning. Has positions for full piston charge, reduced piston charge for suppressors and no piston charge for single shot firing. "Mellonite" Coated Carrier is single piece with Integral Action Rod Lug. The Daniel Defense DDM4 Rail extends under the gas piston block for a truly custom look and feel. Comes with three rail covers to protect your hands. Barrel has a Yankee Hill Serrated flash suppressor for reduced muzzle flash. This is one sweet silky smooth upper assembly! It is truly impressive.

One piece bolt carrier is made out of high grade stainless steel and treated with a proprietary meloniting process that gives it the same, if not better, hardness level and corrosion resistance of hard chrome. We've also designed them with "skis" on the back to eliminate any wear you may experience on the extension tube.

We are a FFL licensed manufacturer, but this upper can be shipped to an individual – no need to transfer through FFL. You are responsible to know the laws in your area!

Flattop upper with Forward Assist and Port Cover
Criterion Stainless Steel 1 in 8" twist 20” barrel
Yankee Hill Phantom Flashhider

Daniel Defense 12 inch DDM4 Free Float Forearm with Rail Covers
Milspec Bolt

Gunfighter Charging Handle Mod 4

Front Swivel is now QD LOW PROFILE - Note: Differs from Picture

Feel free to ask all the question you have. We take the time to answer them all!

This is our custom built AR-15 M4 Flat top Upper Assembly with Adams Arms Gas Piston. This is the "cadillac" upper we call the SuperNova. 16 inch Krieger Stainless Steel Barrel chambered in .223 Wylde 1-8 Twist! (Updated, Not as pcitured!) Samson Rail 9 EX Rail.) Mil-spec Upper receiver. We double check head-space and test fire after assembly. This barrel will stabilize all .223 or 5.56 bullets. Lilja barrels are the among the Best in the Business!

One piece bolt carrier is made out of high grade stainless steel and treated with a proprietary meloniting process that gives it the same, if not better, hardness level and corrosion resistance of hard chrome. Designed with "skis" on the back to eliminate any wear you may experience on the extension tube.

Tactical charging handle makes loading with a scope easier.

Absolutely no modifications required to lower. Uses the same mags as any 223/5.56. Will mate to any quality Mil-spec lower except some Colts with the Large diameter take-down pins. We do stock the adapter pins for these Colts.

Mil spec Receiver: 7075, T6 aluminum, flattop rail. Finished with mil-spec, hard-coat, black anodizing for protection from scratches, mars, and abrasion.

Adams Arms Gas piston system. We have tested several other gas piston systems and have settled on the Adams Arms for dependability and ease of cleaning. Has positions for full piston charge, reduced piston charge for suppressors and no piston charge for single shot firing. The Samson Evolution EX Rail extends under the gas piston block for a truly custom look and feel. Barrel has a Yankee Hill Recoil Compensator for reduced muzzle rise. This is one sweet silky smooth upper assembly! It is truly impressive.

We are a FFL licensed manufacturer, but this upper can be shipped to an individual – no need to transfer through FFL. You are responsible to know the laws in your area!

Flattop upper with Forward Assist and Port Cover
Krieger Stainless Steel 1 in 8" twist 16” Hand lapped barrel and Bead Blasted
PF Kissaki Compensator
Samson 9 EX Free Float forearm
Milspec bolt

Feel free to ask all the question you have. We take the time to answer them all!

Lead times are about 16 weeks. Email if you want to check current status or if you wish to have sooner and we will check if we can accomodate that.

This is our custom built AR-15 Upper Assembly with Superlative Arms Gas Piston. This is the "cadillac" upper we call the SuperNova 204. 20 inch Krieger Stainless Steel Barrel chambered in 204 Ruger 1-11 Twist! Fortis Switch MLOK 15" Handguard. Mil-spec upper receiver with M4 Feedramps with Totally Free Floated Barrel. We double check head-space and test fire after assembly. This barrel will stabilize all 204 bullets up to 32 grains and most 40 grain bullets. Krieger barrels are the among the Best in the Business!

Extended Latch charging handle makes loading with a scope easier.

Absolutely no modifications required to lower. Uses the same mags as any 223/5.56. Will mate to any quality Mil-spec lower except some Colts with the Large diameter take-down pins. We do stock the adapter pins for these Colts.
 

Mil spec Receiver: 7075, T6 aluminum, flattop rail, accepts Weaver-style rings and your tactical accessories. Finished with mil-spec, hard-coat, black anodizing for protection from scratches, mars, and abrasion.

Superlative Arms Gas piston system. We have tested several other gas piston systems and have settled on the Superlative Arms for dependability and ease of cleaning and adjustment. Has positions for full piston charge, reduced piston charge for suppressors and no piston charge for single shot firing. The Fortis Switch MLOK Handguard is extremely comfortable and has a latch system to easily remove handguard for cleaning the piston system.

This is one sweet silky smooth upper assembly! It is truly impressive.

We are a FFL licensed manufacturer, but this upper can be shipped to an individual – no need to transfer through FFL. You are responsible to know the laws in your area!

Flattop upper with Forward Assist and Port Cover
 Krieger Stainless Steel 1 in 11" twist 20” Hand lapped barrel with target crown
Fortis Switch MLOK Handguard
Superlative Arms carrier machined one piece with operating Lug - with bolt

Feel free to ask all the question you have. We take the time to answer them all! We have the best customer service bar none!

This item is built to order and will ship in approximately 16 weeks from order placement. If this is what you are looking for except you wish for a item or two to be different, then email or call us! We are custom builders, we will guide you though the process, we will advise you on what works and what does not. No question is stupid! (Except the one that isn't asked!)

Soft Target Interdiction Rifle 204 Ruger Mod 2

This Extremely Accurate 204 Ruger Rifle comes equipped to punch tiny groups in paper or be the terror of a pararie dog town. Easily shoots under .5 MOA! Matched Upper and Lower for Tightest Fit. Barrel is our own proprietary 1-10 Twist that will stablize all bullets from 30 to 50 grains. Blanks made by Bartlein, cut rifled and lapped. Our SuperMatch Carriers are Nickel Boron coated for consistent lock times and ease of cleaning. PF LMD brake cuts recoil to almost nonexistent. Everyone that shoots these rifles is impression with the rock steady feel and amazing accuracy.

Components are as follows:

Upper:

• Bartlein 204 Ruger 1-10 Twist 24 inc Barrel Chambered by PF and Dimpled
• PF Mod 2 Billet Upper Upper
• Matched Upper and Lower
• Seekins MSCR V2 15"
  
• PF Super Match Carrier Group
• PF LMD Brake
• Raptor Ambi Charging Handle

Lower:

• Magpul PRS Stock
• PF Hogue Grip
• Geissele SSA-E Trigger
• BAD ASS Ambi Safety
• Tactical USA Softcase, 2 Lancer Mags
• Test Fired

Lead time about 2-3 weeks average.

This is a AR-15 6.8 SPC II upper with 16 inch Precision Firearms Stainless Steel Barrel. Milspec upper receiver with Yankee Hill Machine TJ Free Float Forearm. Barrel in 1-11" twist, Hand Lapped, Carbine Gas System (Barrel Finishes are Optional, Pictured is Cerakote Option). This upper is specially designed for Tactical or Hunting appplications where weight and accuracy is a consideration. Our customers are reporting that upper assemblies using these barrels are consistently shoot better than .75 MOA! DOES include PF bolt and carrier, and BCM charging handle.

NOX (Latin for Night) Flash Hider is our own design to maximize flash reduction without sacrificing accuracy. Machined from Marine Grade stainless steel.

Upper Receiver is 7075 aluminum, flattop rail, accepts Picatinny-style rings and your tactical accessories. Has M4 Feed Ramps. Finished with mil-spec, hard-coat black anodizing for protection from scratches, mars, and abrasion. Includes case deflector, port cover, and forward assist.

We are a FFL licensed manufacturer, but this upper can be shipped to an individual – no need to transfer through FFL. You are responsible to know the laws in your area!

Precision Firearms Flattop Upper With M4 Feed Ramps

6.8 SPC II Chamber
Precision Firearms 1 in 11" twist 16” Stainless Steel Barrel made from our drawings and Hand Lapped.

Precision Firearms stainless steel NOX Flash Hider

Yankee Hill TJ 9 inch Free-float forearm with Finish Ring
Steel Low Profile Gas Block

Stainless Steel Gas Tube

BCM Charging Handle

Precision Firearms Bolt Carrier group

Weight 4 lbs, 8 oz.

Feel free to ask all the question you have. We take the time to answer them all!

This is a AR-15 6.8 SPC II upper with 16 inch Match Grade Stainless Steel Barrel. Milspec upper receiver with Yankee Hill Machine Diamond Free Float Forearm. Barrel in 1-11" twist, Midlength Gas System, and bead blasted to cut reflectivity. We double check headspace during assembly. This upper is specially designed for Hunting and Tactical Purposes. Our customers are reporting that upper assemblies using these barrels are consistently shoot better than .75 MOA! DOES INCLUDE bolt and carrier, and Vltor/BCM charging handle.

Our own NOX Flash Suppressor is designed to maximize flash reduction without sacrificing accuracy. Machined from solid stainless steel.

Machined, 7075, upper receiver, flattop rail, accepts Picatinny-style rings and your tactical accessories. Finished with mil-spec, hard-coat, black anodizing for protection from scratches, mars, and abrasion. Includes case deflector, port cover, and forward assist.

We are a FFL licensed manufacturer, but this upper can be shipped to an individual – no need to transfer through FFL. You are responsible to know the laws in your area!

Precision Firearms Flattop Upper

6.8 SPC II Chamber
Match Grade 1 in 11" twist 16” Stainless Steel Barrel made from our drawings and hand-lapped.

Precision Firearms stainless steel NOX Flash Hider

Yankee Hill Diamond Free-float forearm
Single Rail Gas Block

Stainless Steel Gas Tube

Vltor/BCM Mod 4 Charging Handle

Precision Firearms Phalanx Carrier with Phosphated MP Bolt

Weight  4 lbs. 13oz.

Current Lead Time to shipment 4 weeks. Updated 03/23/13

Feel free to ask all the question you have. We take the time to answer them all!

This is a AR-15 6.8 SPC II upper with 16 or 18 inch Precision Firearms Stainless Steel Barrel. Milspec upper receiver with Seekins Precision Forearm. Barrel in 1-11" twist, Midlength Gas System, and bead blasted to cut reflectivity. We double check headspace during assembly. This upper is specially designed for  Hunting appplications where weight is a consideration, but velocity also is important. Guaranteed to shoot sub MOA at 100 yards with factory ammo! DOES include bolt and carrier, and BCM Mod 3 or 4 charging handle.

Barrel made to our Specs from 416R Stainless, Handlapped, 1-11 Twist, Spec II chamber, threaded 1/2x36.

Optional: Fluting

Flash Hider is our own, designed to maximize flash reduction without sacrificing accuracy. Machined from solid Bar stainless steel.

Machined, 7075, upper receiver, with flattop rail, accepts Picatinny-style rings and your tactical accessories. Finished with mil-spec, hard-coat, black anodizing for protection from scratches, mars, and abrasion. Includes case deflector, port cover, and forward assist. Has M4 FeedRamps.

We are a FFL licensed manufacturer, but this upper can be shipped to an individual – no need to transfer through FFL. You are responsible to know the laws in your area!

Precision Firearms Flattop Upper

6.8 SPC II Chamber
Precision Firearms 1 in 11" twist 16" or 18” Stainless Steel Barrel made from our drawings and Hand-lapped.

Precision Firearms stainless steel Flash Hider or YHM Brake or Phantom Flash Hider

Seekins Precision Forearm
PF Single Rail Gas Block

Stainless Steel Gas Tube

BCM Tactical Charging Handle

Precision Firearms Bolt Carrier with Phalanx Coating

Weight appro. 4.7 lbs. Nonfluted. 4.2 Fluted

Current Lead Time to shipment 16 weeks. Updated 05/10/2021

Feel free to ask all the question you have. We take the time to answer them all!

Precision Firearms Built 6.5 Grendel Neptune Mod 8 with Krieger, Bartlein, Lilja, or Criterion stainless steel barrel. Krieger and Bartlein are Cut Rifled and Hand lapped. Lilja and Criterion are button rifled and hand lapped. Medium weight barrel with 1-8 twist. Precision Firearms Mod 1 Billet Upper receiver with Forward Assist, Shell Deflector, and Port Cover. Bolt is matched and properly headspaced to barrel. These barrels are among the best barrels available. We profile, chamber, thread, and install the barrel extensions in house. We control the quality. Customer after customer report sub .5 moa with match ammo! Includes Our Own Boron Nickel Super Match carrier, and Vltor Gunfighter Mod 3 (large) or 4 (medium) charging handle. Precision Firearms LMD Match Brake fitted to barrel to reduce recoil by 60%.

We use true SAAMI Spec Chambers.

Use only magazines appropriate for the cartridge type. Absolutely NO other modifications REQUIRED to lower. Will mate to any quality Mil-spec lower except some Colts with the Large diameter takedown pins. We do stock the adapter pins for these Colts.

Precision CNC Billet Receiver: 7075-T6 aluminum, flattop rail, accepts Picatinny-style rings and your tactical accessories. Finished with mil-spec, hard-coat, black anodizing for protection from scratches, mars, and abrasion. Includes Forward Assist, Shell Deflector, Port Door. Massive walls for added strength!

We are a FFL licensed manufacturer, but this upper can be shipped to an individual – no need to transfer through FFL. You are responsible to know the laws in your area!

• Precision Firearms CNC Machined Billet Mod 1 Upper Receiver
•  Krieger, Bartlein, Lilja, Criterion barrel blank
• Stainless Steel 5/8x24 threaded muzzle
• Precision Firearms LMD Brake in appropriate Caliber
• Samurai Firearms Premium MLOK 15" Handguard
  
• Precision Firearms Super Match Carrier Group - Boron Nickel Coated
• Vltor Charging Handle MOD 3 or 4
• Optional - Fluting, Flash Hider

 Weight: 5 Lbs, 6 oz.

Complete upper ready to drop onto your Lower.

Guaranteed to shoot .5 or better Groups at 100 yards.

Lead time is 6-8 Weeks. If you need it faster - you can email and check on our current lead time.

Fluting Adds 2 Weeks to All Delivery Times.

Precision Firearms Upper 243 Win for the DPMS Pattern Rifles with Lilja 243 Win Barrel. Barrel is stainless steel, 1-8 twist with Special Forces proven 3 groove rifling , hand lapped, with our own stainless steel LMD (level muzzle device) Brake. 3 groove rifling increases muzzle velocity due to less bullet drag. Hand guard is our own MLOK free-floating 15" and the Receiver is a Billet Lightweight 308 receiver. Advanced level upper that is capable of shooting  .5 minute groups or better and perform flawlessly. Does  include charging handle and  Black Nitrited carrier group. Weight is 6lbs with carrier group. Reports have been consistently sub minute at 200 yards.

DPMS Type Billet Lightweight Receiver with Port Cover

Lilja 20 inch Barrel threaded 5/8x24

Nickel Boron Carrier and Bolt Assembly

SF Free Floated 15" MLOK Handguard

SF LMD Brake

BCM Mod 4 Charging Handle

JP Optimized Barrel Extension

LEAD TIME: 16-18 weeks. Your Card will be charged when order is placed as this is a special order item and due to the custom nature of this caliber. Only order if you can agree to this. We value your business, but we have to maintain business and due to the volume of declined cards after the units are built, we have to get payment before starting the build.