.................................................
Search
Our re-designed 30mm Sniper Grade Scope Rings are not only more ergonomic, but they are lighter as well. Each ring only weighs four ounces. Not bad for a ring manufactured from solid billet 4140 steel. Prior to being manganese phosphate treated with a matte black combat finish, all components of the ring are carefully de-burred so as to eliminate any sharp edges. The square recoil cross lug will ensure a positive engagement with the mounting rail. Four steel cap screws attach the top portion of the ring to the ring base. These scope rings are tall enough to accommodate a scope with a 56mm objective lens and Butler Creek lens covers on a Remington 700 BDL rifle. GG&G manufactures these tactical 30mm rifle scope rings in the USA at our Tucson, Arizona factory. Aside from SWAT team and military customers, hunters prefer these rings because they are able to count on them for more accuracy at greater distances. Steel scope rings for the Remington 700 are the perfect optical mounting platform for all kinds of scopes, and maintain accuracy even when you're going through brush and trees to reach your target.
Feel free to ask all the question you have. We take the time to answer them all!
The new GG&G AR15/M16 Fixed Stock Receiver End Plate For HK Style Snap Hooks is a great lightweight and rugged alternative to clipping into the standard sling swivel. Installation of this unique accessory is easily accomplished, requiring removal of the fixed buttstock and installation of the new GG&G Receiver End Plate, adapter spacer and longer screw, all included in the package. This lightweight HK sling accessory weighs in at less than one ounce. It is machined from 7075 billet aluminum and is Type III hard-coat anodized matte black per mil-spec. Although primarily used as a single point attachment method, a dual point sling system can also be employed with this attachment.
The GG&G A2 Spring Actuated BUIS (Back Up Iron Sight) is the latest evolution in our BUIS product line. Many operators requested that we manufacture an A2 BUIS rear flip sight that would deploy with just a push of a button. We think we have successfully fulfilled that request. The unique and proprietary design of the spring site mechanism allows the actuator spring and mechanical components to be captivated and therefore not be open to the environmental elements. The flip up sight not only springs into an on target position with just the push of the actuator button, but it also locks solidly into the upright on target position. Another push of the button and the lock is released allowing you to set the spring sight into the locked down position. The flip rear sight cannot be folded down without depressing the actuator button located on the left side of the sight base. This totally eliminates the possibility of accidentally lowering the A2 flip sight. Equipped with the GG&G tactile grip windage knob, adjustments are easy and precise.
The GG&G A2 Spring Actuated BUIS provides the operator with an easy-to-install push button operated AR 15 flip up sight. The Spring Actuated A2 BUIS can be used as a stand-alone sight or in conjunction with one of our interface rails. It can also be used as a co-witness iron sight with most red dot sighting systems. Weighing in at just over 2.4 ounces, it features the standard military A2-style double peep aperture which allows for end user known point of impact. The AR15 flip up rear sight has full windage adjustment with standard military windage knob and windage screw. No need to retrain. One click of the windage knob provides approximately 0.48 MOA change when mounted on the M16A2E4 rifle and about 0.65 MOA on the M4 carbine. Initial zero is set by adjusting the weapons front sight post. It is low profile so that when in the down position, it will clear most optics. The mount body and sight stem are manufactured from solid billet 6061 T6 aluminum alloy and Type III hard coat anodized in a non-reflective black mil-spec finish to provide combat durability. All steel components are black manganese phosphated per mil-spec.
The Harris Bipod is probably the most popular budget priced bipod in the market today. Unfortunately it does not easily attach to Weaver or MIL-STD-1913 dovetails. We thought it was time to offer an extremely rugged and low profile Harris Bipod Adapter to fill this important requirement. Features of the GG&G Bipod Adapter include a counter sunk locking cross bolt that helps eliminate the possibility of snags. The clamping side bar is recessed into the overall body of the adapter to provide a smooth overall appearance, and solid clamping engagement, even on undersize or worn dovetails. Most importantly, the GG&G Harris Bipod Adapter makes full surface contact with the Harris bipod interface which assures a tight fit.
Harris Bipod Adapters are manufactured from solid billet 6061 T6 aluminum and are Type III hard anodized in a matte black non-reflective combat finish to meet mil-spec.
This model is specifically manufactured to the proper sight height for mounting on a tactical forearm or can be installed on gas blocks that are at the same height as the upper receiver. Not only is it set for use on the AR15, but will co-witness when mounted to the tactical forearm of an AR-10. The sight stem of this version folds rearward. The dovetail front is easily installed and we even include the allen wrench for you to use.
To insure flexibility, we use standard military sight components in this combat ready sight. All models of the GG&G Spring Actuated Flip Up Front Sight are manufactured from 6061 T-6 aluminum and are bead blasted and hard coat anodized to provide a non-reflective, corrosion resistant matte black finish meeting mil-spec requirements. All edges have been dehorned for the operator's safety.
Home | About Precision Firearms | F.A.Q | Testimonials & Partners | Contact Us | Policies
