10 round, 6.5 Grendel stainless steel magazine with a blue follower, Black finish. This is the 15 Round body, Factory C-products blocked mag. Legal for 10 round requirements yet gives the shooter the length of the 15 Round Body for holding and reloading ease.

Hold 10 rounds comfortably.

Manufactured by C-products.

We guarantee your satisfaction.

6.5 Grendel is a registered trademark owned by Alexander Arms. We are licensed by Alexander Arms to manufacture 6.5 Grendel Ammo and Products bearing the Grendel Trademark.

Feel free to ask all the question you have. We take the time to answer them all!

15 round, 6.5 Grendel stainless steel magazine with a blue follower, Gray High Lubricity finish.

Hold 14 rounds comfortably.

Manufactured by ASC.

We guarantee your satisfaction.

6.5 Grendel is a registered trademark owned by Alexander Arms. WE are licensed by Alexander Arms to manufacture 6.5 Grendel Ammo and Products bearing the Grendel Trademark.

Feel free to ask all the question you have. We take the time to answer them all!

25 round, 6.5 Grendel stainless steel magazine with a blue follower, Gray High Lubricity finish.

Manufactured by ASC.

We guarantee your satisfaction.

6.5 Grendel is a registered trademark owned by Alexander Arms. WE are licensed by Alexander Arms to manufacture 6.5 Grendel Ammo and Products bearing the Grendel Trademark.

Feel free to ask all the question you have. We take the time to answer them all!

5 round, 6.5 Grendel stainless steel magazine with a blue follower, Gray High Lubricity finish.

Manufactured by C-products.

We guarantee your satisfaction.

6.5 Grendel is a registered trademark owned by Alexander Arms. WE are licensed by Alexander Arms to manufacture 6.5 Grendel Ammo and Products bearing the Grendel Trademark.

Feel free to ask all the question you have. We take the time to answer them all!

5 round, 6.5 Grendel stainless steel magazine with a blue follower, Black finish. This is the 15 Round body, Factory C-products blocked mag. Legal for 5 round requirements yet gives the shooter the length of the 15 Round Body for holding and reloading ease.

Hold 5 rounds comfortably.

Manufactured by C-products.

We guarantee your satisfaction.

6.5 Grendel is a registered trademark owned by Alexander Arms. We are licensed by Alexander Arms to manufacture 6.5 Grendel Ammo and Products bearing the Grendel Trademark.

Feel free to ask all the question you have. We take the time to answer them all!

5 round, 6.8 SPC stainless steel magazine with a Gray Anti-tilt follower, Gray finish.

Manufactured by ASC.

We guarantee your satisfaction.

Feel free to ask all the question you have. We take the time to answer them all!

The Geissele Super Semi-Automatic (SSA) Trigger is the semi-auto only version of a select fire trigger that Geissele makes for customers in the U.S. Special Operations community. The SSA is a non-adjustable combat trigger, it is not a match trigger. The second stage break is like a carrot rather than an icicle. Suitable for Close Quarters Battle (CQB) and mid-range carbine work, the Geissele SSA is also the perfect trigger for Squad Designated Marksman (SDM) rifles. A short summary of the Geissele SSA features and advantages are:

1. Performance Advantages for the Shooter

• The Geissele SSA has a pull weight of about 4.5lb. 2.5 lbs on the first stage and 2lb on the second stage. The pull weights and sear engagement are non adjustable by the shooter.
• Trigger and hammer are made from quality tool steel
• Sear surfaces are cut by a wire edm machine. Sears cut this way are very accurate and the non-directional surface finish of the wire edm gives a smooth trigger pull without the associated grittiness of directional machining marks left by a milling cutter.
• The initial force needed to start the disengagement of the sear surfaces is low and the force linearly increases at a low rate. This helps the shot to fall at the initial point of aim and aids in building shooter confidence in his weapons ability to put the rounds where his sight is pointing.
• The Geissele SSA trigger allows the shooter to slap through the trigger pull on close in shots but also set up a long range shot with a crisp trigger break.
• A full force hammer spring is used for quick locktime and positive ignition of all types of ammo. No lightened hammer spring is used.
• The hammer is lighter than a standard AR15 hammer. The lightened hammer favorably decreases locktime and increases accuracy of the weapon, especially for snap shots.

2. Advantages for the Armorer

• The Geissele SSA is a simple design that is very similar to the original M16 trigger. The number of parts is identical.
• There are no adjustment screws to come loose.
• All springs are captive; they will not get lost during disassembly in the field
• The entire trigger can be dissembled for cleaning (no rivets or staked parts)
• The trigger can be installed without removing the safety
• Sear engagement is pre-set from the factory.
• Hammer and trigger pins are a close slip fit into nominal receiver holes so the trigger can be installed and removed with rudimentary tools.
• Triggers come with a slave pin for the trigger/disconnector assembly for easy installation.

3. Safety Advantages

• The Geissele SSA is a 2 stage trigger where there is generous overlap of the sear surfaces which contributes to safety and a low tendency of any inadvertent movement of the trigger to discharge the weapon.
• The Geissele SSA has a patented pseudo sear that is almost identical to the standard AR15 single stage sear. However, this secondary sear has surfaces that never touch during normal operation. This sear prevents the hammer from falling unless the trigger is pulled.
• The secondary safety sear contributes to shooter confidence in dynamic/vehicle situations where a fellow shooter’s muzzle may cover him. There is firm knowledge that even with the safety in the fire position the weapon can never discharge unless the trigger is pulled.
• Trigger timing is robust and parts have been sized to operate with a certain amount of wear to the working surfaces. The trigger is designed to operate in dusty, abrasive environments that cause wear.

Feel free to ask all the question you have. We take the time to answer them all!

The Geissele Super Semi-Automatic Enhanced (SSA-E) Trigger is a finely-tuned semi-automatic-only version of our full-auto,
two stage combat trigger presently used in the U.S. Special Operations Community. Built on the chassis of the Geissele SSA,
the SSA-E provides enhanced trigger control and weapon accuracy while maintaining the robustness and reliability of our
combat-proven two-stage trigger. The SSA-E’s reduced 1st and 2nd stage pull weights result in a trigger with a smooth, light
1st stage take-up and a crisp, candy cane-like 2nd stage break. The SSA-E is ideal for use in precision Squad Designated
Marksman type rifles where weapon accuracy and reliability are critical and a non-adjustable drop in trigger is desired.

1. Performance Advantages for the Shooter
• The Geissele SSA-E has a pull weight of about 3.5 lbs. There is 2.3 lbs. on the 1st stage and 1.2 lbs. on the 2nd stage. The pull
weights and sear engagement are non adjustable by the shooter.
• Trigger and hammer are made from quality tool steel.
• Sear surfaces are cut by a wire edm machine. Sears cut this way are very accurate and the non-directional surface finish of the wire
edm gives a smooth trigger pull without the associated grittiness of directional machining marks left by a milling cutter.
• The initial force needed to start the disengagement of the sear surfaces is low and the force linearly increases at a low rate. This
helps the shot to fall at the initial point of aim and aids in building shooter confidence in his weapons ability to put the rounds where his sight is pointing.
• The Geissele SSA-E trigger allows the shooter to slap through the trigger pull on close in shots but also set up a long range shot with a crisp trigger break.
• A full force hammer spring is used for quick locktime and positive ignition of all types of ammo. No lightened hammer spring is used.
• The hammer is lighter than a standard AR15 hammer. The lightened hammer favorably decreases locktime over a standard hammer from 8.5 to 5.1 ms and increases accuracy of the weapon.

2. Advantages for the Armorer
• The Geissele SSA-E is a simple design that is very similar tothe original M16 trigger. The number of parts is identical.
• There are no adjustment screws to come loose.
• All springs are captive; they will not get lost during disassembly in the field.
• The entire trigger can be dissembled for cleaning (no rivets or staked parts).
• The trigger can be installed without removing the safety.
• Sear engagement is pre-set from the factory.

• Hammer and trigger pins are a close slip fit into nominal receiver holes so the trigger can be installed and removed with rudimentary tools.
• Triggers come with a slave pin for the trigger/disconnector assembly for easy installation.

3. Safety Advantages
• The Geissele SSA-E is a 2 stage trigger where there is
generous overlap of the sear surfaces which contributes to safety and
a low tendency of any inadvertent movement of the trigger to discharge
the weapon.
• The Geissele SSA-E has a patented pseudo sear that is almost identical to the standard AR15 single stage sear. However, this
secondary sear has surfaces that never touch during normal operation. This sear prevents the hammer from falling unless the trigger is pulled.
• The secondary safety sear contributes to shooter confidence in dynamic/vehicle situations where a fellow shooter’s muzzle may cover him. There is firm knowledge that even with the safety in the fire position the weapon can never discharge unless the trigger is pulled.
• Trigger timing is robust and parts have been sized to operate with a certain amount of wear to the working surfaces. The trigger is
designed to operate in dusty, abrasive environments that cause wear.

Feel free to ask all the question you have. We take the time to answer them all!

The Geissele Hi-Speed National Match Trigger is designed for competitive shooting and semi-automatic sniper weapons. It is a fully adjustable trigger that can be tuned by the shooter to suit individual tastes. This gives the Geissele Hi-Speed flexibility to cover a broad range of shooting styles. From Benchrest and Varmint shooting to CQB entry work the Geissele Hi-Speed does it all, does it well, does it safely and reliably.

We have three different trigger models in the Hi-Speed line:
Service Rifle, Designated Marksman Rifle (DMR) and Match Rifle

 This Listing is for the HIGH SPEED SERVICE RIFLE TRIGGER

The Geissele Hi-Speed Service Rifle Trigger is designed for NRA High Power Service Rifle competition. It is an approved trigger for use in CMP sanctioned competitions such as: National Trophy, NTIT and all Excellence In Competition matches. Service Rifle competitions require military based weapons to meet certain criteria, one of which is a minimum trigger pull weight of 4.5 lbs. Our Service Rifle Trigger includes our exclusive 5-Coil trigger spring which will give a nominal 4 lb 1st stage. The Service trigger pull weights are biased with most of the pull weight on the 1st stage. This will allow a light second stage with an icicle sharp break, effectively giving your weapon a match grade trigger let off.

Service Rifle

1st Stage 3.2 - 5lb.       2nd Stage  0.5 - 1.5lb.

Feel free to ask all the question you have. We take the time to answer them all!